Status Lights : 50mm diameter LED display Status Lights flush mounted within the ClearSec uprights. The Green badge symbol is continuously illuminated indicating passage is available. Upon authorisation a Green Arrow will illuminate in the direction of passage authorisation whilst in the opposite direction a Red cross symbol will illuminate to indicate the unit is not available for use or is already in use..

Installation Examples

Walkway Lights : A 24 volt halogen walkway downlight is included as standard, which will be illuminated continuously. Unit has an adjustable time out facility if required i.e. Go signal will be cancelled if passage through turnstile is not completed within pre-set time. The standard default is 8 seconds adjustable via parameter change. Power Supply : 115/230 Volts AC 5/60 Hz Power Rating : N/C – Standby or Passage 50Va (Alarm Condition 50Va) N/O – Standby or Passage 5Va (Alarm Condition 50 Va) Logic Voltage : 24 Volt DC Installation Details : ClearSec G models are delivered as a partly assembled kit of parts, which may require lifting gear for off loading. A pp rox. wei g ht 400 k g . de p endin g on s p ec.

Models Available

ClearSec G – Internal/External full Height Security Turnstile ? G90/G120 Rotor - 316 stainless steel straight type arms and a black finished mild steel rotor column. ? G90SL/G120 SL Rotor - 20mm thick acrylic slats with textured mid and bottom slats and black painted mild steel stator bars. ? G90FP/G120FP Rotor - Full length 9.5mm thick solid polycarbonate panel for internal use only. Important Note - The Full length solid polycarbonate rotor panels should only be supplied as fail-safe to prevent trapping of pedestrians in the “dead” area during power failure. If fail lock is specified the written agreement of the customer to this configuration must be obtained before the ClearSec G is supplied by Gunnebo Entrance Control Ltd.

Accessories and Optional Extras

Alternative Materials and Finishes ? Casework finished with polyester powder coated semi-gloss paint. ? Casework manufactured from 316 grade stainless steel EN10088-2 Grade lK/2K ? Tinted Glass. ? Other Glazing types. ? Grained Stainless Steel clad infill panels to replace standard glazed panels. ? Demountable roof fascia panels enabling access for reduced ceiling clearance of minimum 200mm. Card Reader Mounting ? Readers can be surface mounted on casework upright. ? Battery Back Up Card Reader Mounting Pedestals. ? Maintains all 24 volts control facilities for 500 operations or 4 hours whichever the sooner. Push Button Control ? Simple remote console to house ClearSec pushbutton overrides. ? Remote console to specific requirements. ? Additional Interface Casework mounted pushbutton. ? RS 485 Serial Interface.

………………………………………………………………

PDS/ClearSec G/Issue 3 10-2003