ClearSec G
Internal and External Full Height Security Turnstile
Rotor Elements : G90 4N
O Drive : Hand operated
O G120 3N Orientation : Pass Left or Pass Right Materials : Casework: 304 Grade Grained Stainless Steel. (EN10088-2 Grade 1G/2G) Glass Infills: 6.4mm 3 ply Laminated
Glass panels Turnstile Roof: 304 Grade grained stainless steel. (EN10088-2 Grade 1G/2G) Rotor Arms: 316 Grade Satin Polished Stainless Steel EN10088-2 Grade 1K/2K). Rotor Column: 100mm dia. Mild Steel Painted Black Polyester Powder Coated Function : Passage in both directions, electronically controllable. Head Mechanism : Control of the Turnstile operation is achieved by an Electro-mechanical head mechanism and is silent in operation. It comprises:-
ClearSec G ? A positive action lock which prevents two passages at one time ? A self-centering mechanism to ensure complete rotation of the head to the reset position. ? An anti backup device prevents reverse rotation once the head has moved 30
O from its rest position. Operating Modes : The mechanism can be configured to operate in two standard modes. ? A hydraulic damper to ensure smooth and quiet operation ? Normally Closed The mechanism is locked until a valid authorisation signal is received. ? Normally Open The mechanism is permanently unlocked and will only lock if passage is attempted without a valid authorised signal. In this mode the MTBF is increased from 1.5 to 2.5 million cycles and increases passage throughput speeds.
Product Description
Power Failure : In the event of an emergency or isolation of power supply, unit may be configured to fail-safe i.e. rotor freely rotates or fail-lock, i.e. rotor
locks furniture. Either option is available in both or one direction. Choice must be denoted at time of order placement. Fire Alarm - Input facility available for voltage free contact supplied by others to effect fail sate. Note: Head mechanism fail state will be the same as power failure choice.
ClearSec is an alternative approach to full height security from our Control range of products for internal or external use. Choice of materials allows complete integration into any environment and 90 or a 120 degree rotor for easier entry.
Interface : The mechanism is controlled by means of an LCM02 microprocessor control logic with the following features: - ? One input for opening/locking the mechanism in each direction ? Two protected outputs for control of the opening/locking solenoids
Users include
? Four protected outputs for piloting way mode indicators. ? Two 0V output relays indicating availability of use in either direction. ? Two 0V outputs to count passage in either direction The logic is protected against short circuits, overloads and polarity inversion. Additional detailed information is available upon request.
? Government ? Retail ? Finance ? Telecommunications ? Information Technology ? Banking ? Publishing ? Leisure ? Petrochemical ? Pharmaceutical ? Education
ISO 9001 FM 13503 Control
PDS/ClearSec G/Issue 3 10-2003