HiSec6
Security booth for Internal or Semi External Use Technical Specification
Drive: Motorised Orientation: Walkway functions as both Entry and Exit
HiSec6 Materials : Framework: 40 x 10 x 3mm RHS mild steel Cladding: 4mm mild steel, wet spray painted, textured finish to Gunnebo Entrance Control Ltd RAL colour selection. Glazing: ? Lite - 13mm Laminate Safety Glass. (6mm Glass / 0.75mm Interlayer / 6mm Glass) ? Bullet Proof - 27mm Laminate Safety Glass C2 specification (AP/B-AC/A to UNI 9186-9187 standards) Standard Colours : Black - 9005, Grey - 7001, Blue 5010, Brown - 8019 and Red - 3000. Please note that the colur of the moving
doors furniture framework is always black. Function: Passage in both directions, electronically controllable. Mode of The doors are always locked shut in the rest position. An authorised signal Operation: opens the first door allowing the user to step into the booth where a presence is detected via means of checking weight increase on the floor, side panels and doors. The first door then closes and the second door opens, thus allowing the user to pass through. The second door shuts after the unit has been vacated which also resets the system. Prevention of Electronic weight sensing determines if more than one person is present within Multi Person the booth. The booth is set with a predetermined, but adjustable anti hostage Entry: threshold (upper and lower weight limit) of 120Kg as standard. As an authorised user stands in the booth, it confirms acceptance of the occupant and authorises the door to close. Should the measured weight not be authorised, i.e. more than one person present or over weight non-permitted additional baggage, a vocal synthesiser will ask the occupants to leave the booth. Once the occupants have vacated the booth the door will close and the system will automatically reset. Standard upper and lower weight limits range from between 1 - 140Kg. For heavy requirements a maximum setting of 160Kg is also available. Any object left inside the booth will be detected during the reset sequence. An alarm will be activated and the object will have to be removed by manually opening the secure side door. 250 grms min.
Product Description
The HiSec6 security booth offers the highest level of personnel access control with presence, passage and weight detection as standard.
Passage As authorised passage occurs the doors open and close in sequence. To Confirmation: confirm this operation separate outputs are given for each door as it closes to confirm the movement of the occupant from one side of the booth to the other. Battery Back Up: Battery Back Up is supplied as standard. It will allow the booth to operate on continuous cycle of approx. 2 hours, if batteries are fully charged and maintained.
Users include
? Head Offices
Power Failure:
? Banking
In the event of a power failure, isolation or after the BBU has been depleted,
? Computer Suites
the outer, un-secure door will fail safe, i.e. un-locked and can be manually pushed open. The inner, secure door will fail lock and is held in place via a lever system situated behind a locked panel above the door on the secure side of the installation. The inner door can be manually opened by rotating a knob located behind the lockable service panel in the top mechanism section of the booth.
? Telecommunications ? Information Technology ? R and D ? Government
Emergency: In the event of emergency a signal can be sent to the booth controller to command either, the secure, non-secure or both doors to open. Fire Alarm Input facility available for 0V contact supplied by others to effect the specified emergency fail state.
? Military ? Security Publishing ? Law Enforcement
ISO 9001 FM 13503 Control
PDS/HiSec6/Issue 4 10-2004 1