Status Lights 50mm diameter LED display Status Lights flush mounted within the ClearSec uprights. The Green badge symbol is continuously illuminated indicating passage is available. Upon authorisation a Green arrow will illuminate in the direction of passage authorisation whilst in the opposite direction a Red cross symbol will illuminate to indicate the unit is not available for use or is already in use.

Installation Examples

Walkway Lights : A 24 volt halogen walkway downlight is included as standard, which will be illuminated continuously Unit has an adjustable time out facility if required i.e. Go signal will be cancelled if passage through turnstile is not completed within pre-set time. The standard default is 8 seconds adjustable via parameter change. Power Supply : N/C – Standby or Passage 50Va (Alarm Condition 50Va) N/O – Standby or Passage 5Va (Alarm Condition 50 Va) : 115/230 Volts AC 5/60 Hz Power Rating Logic Voltage : 24 Volt DC Installation Details : ClearSec GD models are delivered as a partly assembled kit of parts, which may require lifting gear for off loading. Approx. weight 400 kg. Depending on spec.

Models Available

ClearSec GD – Internal/External Full Height Security Turnstile ? GD90 / GD120 Rotor - 316 stainless steel straight type arms and a black finished mild steel rotor column ? GD90SL / GD120 SL Rotor - 20mm thick acrylic slats with textured mid and bottom slats and black painted mild steel stator bars. ? GD90FP / GD120FP Rotor - Full length 9.5mm thick “Margard” polycarbonate panel rotor for internal use only Important Note : The Full length solid polycarbonate rotor panels should only be supplied as fail-safe to prevent trapping of pedestrians in the “dead” area during power failure. If fail lock is specified the written agreement of the customer to such a configuration must be obtained before the ClearSec GD is supplied by Gunnebo Entrance Control Ltd.

Accessories and Optional Extras

Alternative Materials and Finishes ? Casework finished with polyester powder coated semi-gloss paint ? Casework manufactured from 316 grade stainless steel EN10088-2 Grade lK/2K ? Tinted Glass ? Other Glazing types ? Grained Stainless Steel clad infill panels to replace standard glazed panels. ? ntermeshed Demountable roof fascia panels enabling access for reduced ceiling manufacturers clearance of minimum 200mm. I (Refer to Gunnebo Entrance Control Ltd for details) ? In areas of restrictive space a reduced width double ClearSec GD can be supplied having intermeshed rotors. Card Reader Mounting ? Readers can be surface mounted on casework upright ? Battery Back Up Card Reader Mounting Pedestals. ? Push Button Control Maintains all 24 volts control facilities for 500 operations or 4 hours whichever the sooner. ? Simple remote console to house ClearSec pushbutton overrides ? Remote console to specific requirements. ? Casework mounted pushbutton Additional Interface ? RS 485 Serial Interface

………………………………………………………………

PDS/ClearSec GD/Issue 3 10-2003 2