Interface: Potential free contact provided by either cardreader or pushbutton input. Cardreader inhibit and reset outputs signals are available as standard. The unit has an adjustable time out facility if required, i.e. Go signal will be cancelled if the passage through the HiddenGate is not completed within a pre-set time. The Standard default is 8 seconds adjustable via parameter change

.

. Power Supply : 115/230 Volts AC 50/60 Hz Power Rating : Stand by 10 VA In operation 300 VA Logic Voltage : 24 Volt DC Installation Details : The HiddenGate is delivered as a fully assembled unit and may require lifting gear off loading. Approximate Weight : NC – Left or Right cabinet furniture (L or R) circa 170 kg. NC – Centre cabinet ( C ) circa 220kg.

Available models Installation Example

Installation Non Secure Side Installation Secure Side Left Cabinet LRight Cabinet RCentre CabinetC Note - All cabinet variants are available in either Normally Open or Normally Closed construction

Extra Accessories and Optionals

Alternative Materials, Finishes and Custom Design Refer to Gunnebo Italdis for specific material design requirements. Cardreader Mounting (Please refer to Gunnebo Entrance Control SpA for feasibility) Integration of customer supplied readers into the HiddenGate Top or Front inlays. Cardreader Pedestals. Battery Back Up On power failure, the battery back up option will allow the design panels to open, stop and become inactive. The panels will remain in this position until power is restored. Push Button Control Simple console to control HiddenGate panels release. Remote console to specific requirements. Casework mounted push button. Additional Interface RS 485 Serial Interface Traffic Flow Control LED Way Mode Indicator - Switching Red cross and Green arrow to indicate the unit is available for use Remote switching of unit for Traffic Flow. Counting LCD Design counter Electro-mechanical Counter
GI-PDS-HG2 FP-uk-issue 3-24.01.05 2