Catalogues - the-italdis-product-line

Catalogue The Italdis Product Line

www.gunneboentrance.com

Page

/ 73

Make a request

/ 73

See other catalogues for GUNNEBO

Text version of the page

Site Preparation - Compact Save:

Compact Save shown in a wall access integration with the Outer rustic door closed and the Inner door open

992 (Type 1 and 2) 1057 (Type 3 and 4)

Internal handle to manually open the Outer door from outside in case of Emergency Scenario

T f

Q. O "O

0 2

0 7 2 2

5 2 2

M—

.C 'I

7 2 0

0 0

0 5

J_L

% Floor frame inserted in the ground by min 25mm

746 (Type 1 and 2) 55

786 (Type 3 and 4)

Cable entry zone

6 anchor holes for TPSEI M10 bolts x 125mm deep min. (drilled during installation)

Free Exit (internal push button) and

Emergency Exit (upon request)

Inner Door

Two zones Floor contact (Black and central gray mat)

p_y^e ^y_T

^T( 7 25 90 91

p^e p^e

5 7

Outer Door

Internal handle

To manually open the Outer door from inside in case of an Emergency Scenario or power failure.

If operated by public, the version with the optional alarmed hand bar is available


	(Type 1)	(Type 2)	(Type 3)	(Type 4)
A	827	927	1027	1207
B	983	1083	1183	1363
C	1000	1100	1200	1380

Entry upon authorization (i.e. home card reader)

Unit in mm

Concrete to UNI 9858, RCK250 type.

Base to be flat and level to +/- 5mm over the

Compact Save footprint area.

Cables metal conduit, shall come up at least 50mm from foundation

IMPORTANT

Any horizontal pipe or conduit runs below the Compact Save must be at least 140mm below.

The dimension reported on this Product Data Sheet are for information only. In order to prepare the Installation Site,

please refer to the lay-out drawings prepared by Gunnebo Entrance Control SpA or ask confirmation.

DRAFT-GI-PDS-COMPACTSAVE-uk-irev 1-ssue 30.11.04