| | | Due to the process used to manufacture ARTLITE, it is always supplied in a toughened glass version. This explains its level of impact resistance, which is five times greater than that of annealed glass, and why it shatters into small, blunt, safe pieces if broken. ARTLITE can be manufactured from the following kinds of glass: ■ Planibel float in clear; bronze, grey or green ■ Planibel extra-clear* ■ Stopsol Classic** clear, bronze, grey or green ■ Stopsol Supersilver**clear, grey or green ■ Some IMAGIN patterned glasses *** * Please consult Glaverbel for availibility. ** With enamel on the side opposite the coating. For other glasses, please contact us * * * For more information, please contact our technical services. | | There is a wide selection of colours: - large choice of RAL colors available (consult Glaverbel about it) - metallic colours (upon request) - matte, light-diffusing colours (sandblasted type) | | |
| | | COATINGS To enhance protection from the cold and from the sun, ARTLITE silkscreen printed glass can be combined with a high-yield insulating glass such as Thermoplus or a solar control glass such as Stopsol, Solarbel or Stopray. For all-glass facades, ARTLITE is assembled into insulating glazing units as used in structural glazing. If you would like the pattern to run from edge to edge keep in mind that the seal of the insulating glazing will be in contact with the silkscreen contemporary design. In such cases you should contact Glaverbel's Technical Department, which will let you know about the possible manufacturing options. | | |