video corpo

Airplast - 12 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

airplast element for unidirectional slabs • WATERPROOF • LIGHTWEIGHT • STACKABLE

 Open the catalogue to page 1

Geoplast invites you to discover the power of lightness and to build without wasting natural resources. Even in this way can we sustain the future of our existence. RECYCLING, OUR CHOICE Not only we transform our ideas into innovative and successful products, but we also commit into the study and selection of more suitable materials to guarantee an high quality while respecting the environment. Polypropylene (PP) is a recyclable material that can be obtained from plastic waste regeneration. It’s solid and strong with high load-bearing capacity and resistance to abrasion. Moreover, it guarantees...

 Open the catalogue to page 2

SUITABLE FOR: Plastic lightening for prefabricated slabs. AIRPLAST comes from Geoplast long experience with slab lightening elements. AIRPLAST can be easiy installed onto the concrete slabs during the production stage with a perfect alignment. This is possible thanks to its anchoring and alignment system. UNIDRECTIONAL CAST ON-SITE SLABS COMMERCIAL BUILDINGS PREFABRICATED SLABS INDUSTRIAL BUILDINGS

 Open the catalogue to page 3

The most advanced system for the lightening of prefabricated slabs and the construction of completely cast on-site slabs As the lightenings are made of plastics, the forms can be stored in any place without any damage. fast Installation is extremely fast, the lower locking system allows anchoring to the fresh concrete. walkable AIRPLAST is completely walkable, without the risk of breakage at the edges as it happens with polystyrene. AIRPLAST is made of polypropylene, a waterproof element which prevents and avoids any soaking issues. no vents Within the formwork there is only air. There is no need...

 Open the catalogue to page 4

I Why the central cones HIGH LOAD-BEARING CAPACITY The central cones are necessary to ensure the stiffening of the formworh in order to guarantee the maximum safety during the construction stages. LIMITATION OF LATERAL DEFORMATION The cones worh as containmente elements to avoid the formworh deformation when stepped on.

 Open the catalogue to page 5

Actual size (cm) material weight (kg) Package size (cm) No. items per pallet www.geoplast.it Actual size (cm) material weight (kg) Package size (cm) No. items per pallet

 Open the catalogue to page 6

AIRPLAST | DIMENSIONAL TABLES Actual size (cm) material weight (kg) Package size (cm) No. items per pallet AIRPLAST G-H17 Actual size (cm) material weight (kg) Package size (cm) No. items per pallet

 Open the catalogue to page 7

AIRPLAST has lower feet (15 mm) that allow the perfect fusion with the concrete of the base slab, thus avoiding any further movement. AIRPLAST is made of poypropylene which guarantees an high resistance and prevents any risk of breakage during the building stages. AIRPLAST is waterproof, it does not retain or release water over time. It prevents the creation of humidity (mold, stains...). As the formworks are waterproof, there's no risk of water retaining: the finishing of the slab intrados will always be perfect. AIRPLAST does not contain any harmful or explosive gas, so there is no necessity...

 Open the catalogue to page 8

LATERAL OFFSETS Lateral Offsets Easy to cut Clean construction site Precise and safe overlapping As AIRPLAST is made of recycled polypropylene, it can be cut quickly and easily to make offsets. In the upper side the formwork is marked in the exact point where to be cut in order to obtain a correct overlapping of the forms. The cut formwork allows also to follow very precisely any possible inclination of the walls. AIRPLAST keeps the construction site clean when it is cut because it does not create the waste polystyrene usually creates.

 Open the catalogue to page 9

AIRPLAST - PREFABRICATED AIRPLAST formwork can easily be combined with prefabricated slabs. The elements are placed over the fresh concrete and then moved to the construction site ready to be installed. Compared to the polystyrene, AIRPLAST allows lots of logistics and efficiency advantages. Lower base built in the factory with already inserted reinforcement bars and trellis AIRPLAST formwork of precalculated height, which are to be installed in the factory over fresh concrete Pre-installed load-sharing welded mesh Final pour of the ribs + upper slab Application with prefabricated slabs Predalles...

 Open the catalogue to page 10

Building on-site With AIRPLAST it is possible to build cast on-site slabs, such as unidirectional and bidirectional slabs with large spans. AIRPLAST eliminates the use of polystyrene and steel and concrete consumptions are greatly reduced. The high load-bearing capacity and impermeability of AIRPLAST formwork facilitate the building operations, permiting the creation of a perfect slab. High load-bearing capacity Does not fear weathering Lightweight and manageable

 Open the catalogue to page 11

35010 Grantorto PD - Italia - Via Martiri della Libertà, 6/8 tel +39 049 9490289 - fax +39 049 9494028 e-mail: geoplast@geoplast.it - www.geoplast.it

 Open the catalogue to page 12

All GEOPLAST catalogues and technical brochures

  1. geotub

    20 Pages

    En
  2. Geogravel

    12 Pages

    En
  3. Modulo

    32 Pages

    En
  4. Gripper

    16 Pages

    En
  5. Drainpanel

    12 Pages

    En
  6. Runfloor

    8 Pages

    En
  7. Wall-y

    8 Pages

    En
  8. Geoflor

    2 Pages

    En
  9. Drening reflue

    8 Pages

    En
  10. Drening

    8 Pages

    En
  11. Skydome

    8 Pages

    En
  12. Skyrail

    8 Pages

    En
  13. Geopanel Art

    2 Pages

    En
  14. Geotub

    2 Pages

    En
  15. DEFENDER

    2 Pages

    En
  16. MODULO FREEZE

    8 Pages

    En

Archived catalogues

  1. MODULO

    10 Pages

    En