Text version of the page 
Model 840/845 Contactless(Mifare) Smart Card Readers
TECHNICAL SPECIFICATIONS Material and Color Polycarbonate, gray Power Supply Nominal 12 VDC, 140 mA Read range 1 in. maximum COMMUNICATION MODE SETTINGS Keypdad (Model 845) 12-key tactile CASI mode Native mode Operating Temperature –13°F to 185°F Humidity Range 0% to 95% non-condensing MINI-JUMPER Both pins of JP4; JP3 is open Both pins of JP4 and JP3 Index of Protection IP22 (IEC 529) Minimum Wiring 4 conductor Certifications FCC Part 15, CE, UL 294 1 1 beep Supervised F/2F Supervised F/2F DIMENSIONS 2 2 beep F/2F F/2F Height 4.75 in., 121 mm 3 3 beep Strobe Strobe Width 3.00 in., 76.2 mm 4 4 beep Wiegand 4001 Unused Depth 1.70 in., 43.2 mm 5 5 beep RS-232 RS-232 CABLING DISTANCE Push and release the tamper switch the number of times 13.6 Volts that correspond to the desired communications mode. 18 AWG 5,000 ft., 1,525m ORDERING NUMBERS 22 AWG 1,800 ft., 550m Model 840 Contactless Smart Card reader, gray 430134001 12 Volts
CUSTOMER SUPPORT FOR MORE INFORMATION
18 AWG 3,200 ft., 975m
GE Interlogix and their CASI Business Partner Network offer
a full range of support services including site surveys,
installation supervision and training. Emergency support is
available 24 hours a day, seven days a week. Please contact the authorized CASI Business Partner listedbelow to see how the Model 840 and Model 845 Contactless
Smart Card Readers can meet your specific requirements.
Model 845 Contactless Smart Card 22 AWG 1,200 ft., 365m reader, with keypad, gray 430135001 MICROCONTROLLER COMPATIBILITY Installation Wrench 385001001 Micro/ PX-2000 Micro/ PXN-2000
Cabling: The reader will work well with unshielded cable in most environ-ments. No company can guarantee that data will be reliably transmitted for
long distances on unshielded cable in every installation. Typical Wiegand
reader installation requires eight-conductor shielded cable to provide reader
power, controller communication, door contact, exit push button, and tamp-
er switch status. The same functionality is provided by Proximity Perfect
readers, “supervised” with four-conductor unshielded cable. Micro/5 Micro/4 Micro/5 2RP 2RP 2RP All standard ports 2SRP 2SRP 2SRP 8RP 8RP 8RP 8RP
INSTALLATION STATUS INDICATORS Models 840 and 845 Contactless Smart Card Readers come
with a backplate and a weather-resistant gasket suitable for
mounting directly on a standard single-width USA electrical
box. The reader may also be mounted directly on a wall. Models 840 and 845 Contactless Smart Card Readers provide
both an LED status display and a programmable beeper to
indicate reader operation and status. Combinations of beeps
and LED displays indicate microcontroller communicationsstatus, reader tamper, card or PIN code error; in addition to
indicating a valid badge read and a PIN entry requirement.
GE Interlogix, CASI division791 Park of Commerce BoulevardSuite 100, Boca Raton, FL 33487Tel: +1 (561) 998-6100U.S.A. Toll Free: 1 (800) 428-2733Fax: +1 (561) 994-6572Internet: http://www.ge-interlogix.com,www.casi-rusco.comGeneral InformationE-mail: info@ge-interlogix.comCustomer SupportE-mail: support@ge-interlogix.comU.S.A. Toll Free: 1 (800) 428-2733International: +1 (561) 998-6101Training DepartmentE-mail: training@ge-interlogix.com
For the Authorized CASI BusinessPartner Nearest You:United States/CanadaTel: +1 (561) 998-6100Asia/PacificTel: +1 (561) 998-6100Northern EuropeTel: +44 (0)1159 418400Southern Europe / Middle East / AfricaTel: +33 (0)1-49 44 84 00Latin America/CaribbeanTel: +1 (561) 998-6100 Literature contents may change at any time without notice.Other product and company names herein may be the trademarks of their respective owners.GE and GEInterlogix are registered trademarks of the General Electric Company.©1999-2002 GE Interlogix, Inc. All rights reserved.465190001B/10-02