Galletti

SplitSystem Line 2008

Residential Line

www.galletti.it

Indoor air quality starts from the quality of the product.

The Residential line insures high standard comfort and air quality thanks to the assure filtration and purification system combined with the positive effect of the ionization. The filtering system is composed by a photo catalytic filter with titanium apatite and surface treatment with catechism. The inlet air goes across the filter which absorbs the disagreeable smells, remove the dusts and inactivates the bacteria on its sur- face. The effects are positives particularly for the asthmatic and allergic people, for the children and for the old people. The filter is auto generating thanks to the ultraviolet rays of the lights. The system of ionization of the air creates positive effects on the people restabilising the correct ionic equilibrium which we can find in the open air areas, near the woods and in the sea border sites. The negative ions contribute to throw down the disagreeable smells, and to inactivate the bacteria loads and the muffles pre- sent in the ambient. The ionization system is activated directly form the remote con- trol: • Electronic radiation method • In the middle of the room, with a volume of13 cubic meter, 27°C air temperature, 60% relative humidity at the maximum speed , in cooling mode operation around 9000 part cells/cc.• The negative ions are defined as very small part cells negatively loaded , suspended in the air. Ventilation Press to select the minimum ventilation ‘’L’’, medium ‘’M’’. maximum ‘’H’’ or automatic ‘’auto’’. The selection of AUTO insures the most sui- architectural table ventilation speed based on the room air temperature. Press the button TIME ADJ to regulate the time indicated on the display by the clock , and the timer mode.
* Tested by: Japan food analisysy center Test number NO.203041907-002

Infrared home remote control with LCD display. One finger touch to have the best comfort.

. Time Regulation Buttons value increase value decrease These buttons are used when is necessary to regulate the clock. The clock can be regula- ted with minimum intervals of 1 minute, the Timer operation (start up and switch off) with minimum intervals of 10 minutes Operation mode Press this button to change the opera- tion mode choosing between Automatic, Cooling, Dehumidification, Ventilation or Heating, on each pressure. Timer Setting Press this button and the timer will start up or will switch off the unit. Temperature Setting + - On each pressure the temperature set point will increase about 1°C.On each pressure the temperature set point will decrease about 1°C.Maintain the pressure to change quickly the temperature. Sleep Operations + The pressure on this button will set the sleep operation and the switching off with Timer after 0,5-1-1,5-2-3-5 or 7 hours. - Starting up and switching off This button to start up or to switch off the unit. 6