PA 63 ACRYLIC PAINT
2Pages

{{requestButtons}}

Catalog excerpts

PA 63 ACRYLIC PAINT - 1

PRODUCT DATA SHEET – PA 63 ACRYLIC PAINT I. DESCRIPTION The PA 63 Acrylic paint is a coloured coating with a high acrylic binder content especially designed to colour sport-grounds as well as playgrounds. II. QUALITIES The PA 63 Acrylic paint was designed to regenerate grounds’ final coating. It gives them a uniform colour and reinforces their resistance to abrasion and bad weather. The PA 63 Acrylic paint is also frequently used to colour rubber floors, asphalt, bitumen-coated material, concrete guardrail and porous concrete. This paint is a reinforced finish with high quality pigments enabling the surfaces to be non-slippery and increase their resistance to wear. III. PRODUCT PROPERTIES Colours: light green, dark green, brick red, red, dark blue, light blue, grey, white, beige, brown. Binder: acrylic copolymer Dry solids: weight according to NF EN ISO 3251: 60.1 ± 2% calculated volume: 43.9 ± 2% Density according to NF EN ISO 2811-1: 1.38 kg/dm3 ± 0.1 Viscosity according to NF T 30-029: Brookfield RVT, rotor n°6, 10 t/mn: 30 Pa.s ± 5. Thinner: water Drying time: Print-free / recoatable according to NF EN ISO 3678: 8 h Ready for use: 1 week IV. CAUTION GUIDELINES Ambient temperature above 10°C. Do not apply: - At an ambient temperature below 10°C and at a relative humidity rate above 80% - If the surface temperature is below 10°C or above 60°C. - By rainy or foggy weather - If the substrate contains more than 3% of water in weight. Before PA 63 Acrylic paint application, check that the tiles are properly glued together, or to the ground in order to form a uniform surface. NEVER CHANGE COLOUR: a red tile must remain red Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed in June 2015 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: contact@hexdalle.com Page 1 out of 2

Open the catalog to page 1
PA 63 ACRYLIC PAINT - 2

V. APPLICATION GUIDELINES Tools: airless spray gun with a 28/1000 inch nozzle, brush, roller. On porous surfaces, do not use a roller but an airless spray gun to avoid excessive consumption. - Quantities : 2 coats: - 1st coat: 100 kg of PA 63 Acrylic paint, 20L water - 2nd coat: 100 kg of PA 63 Acrylic paint, 10L water Coverage per coat on surfaces that were suitably prepared - 300g/ m² per coat VI. APPLICATION - Once the surface has been suitably prepared (completely wash the surface to get rid of dust, foot prints, mud, grease, etc.) and it has completely dried, apply 2 crossed coats of...

Open the catalog to page 2

All HEXDALLE catalogs and technical brochures

  1. PU 95 BINDER

    3 Pages

  2. PU 63 PAINT

    2 Pages

  3. PU 323 GLUE

    3 Pages

  4. PU 59 GLUE

    2 Pages

  5. PU 32 GLUE

    2 Pages

  6. PU 93 GLUE

    2 Pages

Archived catalogs