LAYING INSTRUCTIONS YOSTRA BOLLARD
2Pages

{{requestButtons}}

Catalog excerpts

LAYING INSTRUCTIONS YOSTRA BOLLARD - 1

LAYING INSTRUCTIONS – HEXDALLE® YOSTRA BOLLARDS The bollards can be fitted in two ways I – ONTO CONCRETE GROUND – Using a fixing plate a) Back-drill with the fixing plate 4 holes into the concrete ground, ø 10 - L 110 mm, b) Fit the FBN 10 pins (not included); Tighten nuts + washers onto the plate. c) Coat the fixing rod with PU 59 glue, fit the YOSTRA bollard. Reflective strips Yostra bollard Steel tube sealed inside the bollard Polyurethane glue Fixing plate Concrete slab 150mm thick Or concrete foundation 300x300x310mm Dosed at 350 kg/M3 YOSTRA BOLLARD ON REMOVABLE PLATE YOSTRA BOLLARD ON PLATE II – ONTO LOOSE SOIL, EARTH, ETC. – Using a fixing rod 3 a) Pour a concrete foundation dosed at 350 Kg/m – 300x300x310mm b) Fit the metal fixing rod (sealing level at the grey mark) 3 c) Fill with concrete dosed in cement at 350 kg / m d) Wait for the concrete foundation to dry (72 hours) e) Coat the fixing rod with PU 59 glue, fit the YOSTRA bollard Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed August 2012 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: contact@hexdalle.com Page 1 out of 2

Open the catalog to page 1
LAYING INSTRUCTIONS YOSTRA BOLLARD - 2

PU59 Polyurethane glue Concrete foundation 300x300x310mm Dosed in cement at 350 kg/M3 YOSTRA BOLLARD ON FIXING ROD TO BE SEALED DIRECTLY THE DIFFERENT FIXING SYSTEMS FOR YOSTRA BOLLARDS Hole for a padlock. (not provided) REMOVABLE BOLLARD FIXING PLATE TO BE FIXED TO CONCRETE SLAB (15 cm thick) OR FOUNDATION (300 x 300 x 310 mm) Height 288mm for P, C and R Yostra bollards 117mm Height 208mm for Yostra BOULE NON-REMOVABLE BOLLARD FIXING PLATE TO BE FIXED TO CONCRETE SLAB OR FOUNDATION and R Yostra bollards Height 500 mm for Yostra BOULE FIXING ROD TO BE SEALED IN CONCRETE FOUNDATION FOR P, C,...

Open the catalog to page 2

All HEXDALLE catalogs and technical brochures

  1. PU 95 BINDER

    3 Pages

  2. PU 63 PAINT

    2 Pages

  3. PU 323 GLUE

    3 Pages

  4. PU 59 GLUE

    2 Pages

  5. PU 32 GLUE

    2 Pages

  6. PU 93 GLUE

    2 Pages

Archived catalogs