HEXDALLE® XE AMY
3Pages

{{requestButtons}}

Catalog excerpts

HEXDALLE® XE AMY - 1

PRODUCT DATA SHEET – HEXDALLE® XE AMY I. CHARACTERISTICS The tile is made of recycled black rubber aggregate which has been sorted and graded, bound by volume-dyed polyurethane elastomer resin. As a result of the composition, expansion in heat and shrinking in the cold are normal. Other processed chemical elements are used in the composition of our tiles to give them their solidity and elasticity. II. COLOURS Brick red – Green – Black – Grey – Chocolate - Flecked with beige EPDM aggregate During storage, make sure the elements are not partially exposed to UV rays as this will affect the colour. If the colour of the tiles is not exactly uniform, simply wait a few weeks for the colour to even out. A colour loss can occur without altering the characteristics of the tile. Green is more sensitive to UV rays than red. A special PU 63 non-slip paint can be applied by airless spraying by a specialist to renovate the appearance of the HEXDALLE® XE AMY tile that has faded with time. III. USE The Hexdalle XE AMY tile is a comfort floor especially conceived for spring games. It can also be used as a regular comfort floor for children. IV. DIMENSIONS / TECHNICAL CHARACTERISTICS 7.45 sqm tile made of 4 elements of approximately 1.50 m x 1.50 m each. Thickness: 40mm. Critical Fall Height: 1.00 m according to laboratory’s test report complying with the NF EN 1177 standard Bevelled edges integrated to the surface Microporous tile with water drainage system integrated underneath. Self-stable thanks to its “puzzle” fixing system (no glue needed). AMY TILE WITH EXTENSION AMY TILE WITHOUT EXTENSION Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed in February 2016 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: contact@hexda

Open the catalog to page 1
HEXDALLE® XE AMY - 2

WARNING: IF YOU USE AMY EXTENSION BOTH IN LENGTH AND WIDTH, PLAN TO USE 500 X 500 MM 40 MM THICK HEXDALLE® XE TILES THAT YOU WILL GLUE WITH OUR PU59 (ON THE EDGE) V. LAYING INSTRUCTION 2 people are necessary to lay the structure. 1. Assemble 2 pieces together 2. Assemble the 3rd piece with the others 3. Assemble the 4th one with the first 3. Laying cost is reduced thanks to the gain of time made with the “puzzle” fixing system. There is a pre-cut system on the underneath (invisible on the top) to insert the spring game. . No need to pour a concrete slab underneath the tile. Nevertheless,...

Open the catalog to page 2
HEXDALLE® XE AMY - 3

Rubber Binding agent Binding agent viscosity Solids content in % of the binding agent Surface Appearance Colour EPDM Thickness Shock-absorbing standard Density Kg/M3 Warranty Abrasion resistance Resistance to ageing UV resistance Resistance to detergent Resistance to solvent Permeability Sound Recycled SBR-type black aggregate, 1/4mm Volume-dyed polyurethane Brookfield: 7,000+/-1,000 - cP at 20°C 99.3 +/- 0.5% Non-slip Granular Red, Green, Black, Grey, Chocolate flecked with beige aggregate 40 mm NF EN 1177 800-1,000 2 years As per standard P90102 Weight loss result: 0.37 g Maximum...

Open the catalog to page 3

All HEXDALLE catalogs and technical brochures

  1. PU 95 BINDER

    3 Pages

  2. PU 63 PAINT

    2 Pages

  3. PU 323 GLUE

    3 Pages

  4. PU 59 GLUE

    2 Pages

  5. PU 32 GLUE

    2 Pages

  6. PU 93 GLUE

    2 Pages

Archived catalogs