HEXDALLE® BALL 430
4Pages

PRODUCT DATA SHEET – HEXDALLE® BALL 430 I. CHARACTERISTICS HEXDALLE® BALL 430 is made of black recycled rubber aggregate which has been sorted and graded, bound by volume-dyed polyurethane elastomer resin. The assembly is then compressed under several tons of pressure. Other processed chemical elements are used in the composition of our HEXDALLE® BALL 430 for solidity and elasticity. II. COLOURS Red – Green – Black – Grey With 1 dot on the top TOTAL HEIGHT (with fixing plate) IV. USE HEXDALLE® BALL 430 is a recreational element, entirely made of rubber that can be used in various ways: As a seat, a balance game, to play leapfrog, limit an area, etc. Very decorative, HEXDALLE® BALL 430 will enlighten your playgrounds and public gardens. HEXDALLE® BALL 430 complies with the NF EN 1176-1 (Oct 2008) standard. V. ADVANTAGES HEXDALLE® BALL 430 is designed with smooth lines. Weather proof VI. SURFACE ASPECT The item has a granular surface aspect due to its composition. VII. SAFETY INSTRUCTIONS It is accepted that children should be supervised at all times. The equipment must not be installed on a too sloping ground. Type of ground: it must be flat or with a 1% slope Clearance: there should be no obstacle less than 2 meters above the equipment (tree branches, etc.) Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was modified in August 2012 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: contact@hexdalle.com

VIII. CLEANING/MAINTENANCE Use our Cleandalle FC bactericidal degreasing cleaning product. The green colour is more sensitive to U.V. than the red colour. HEXDALLE® BALL 430 can be renewed thanks to our special PU63 or PA63 non-slip paint. The paint should be applied by a professional, using an airless spray gun. Each month: • check that the playground is clean • check the ball surface condition • check the ball stability If severe damage is noticed which could threaten children’s safety, action must be taken immediately. If the problem cannot be solved, the equipment should be immobilised...

Play impact surface: shock-absorbing ground – 12.25 sqm (3.50 m x 3.50 m) i.e 1.50 m around the ball 3.50 m Play safety area: Obstacle free – 2m minimum around the equipment 3.50 m Please remember that the game must remain free of any obstacle in a 2-meter area above it (tree branches, etc.) 300 mm a) Fixing plate to be fixed on a concrete slab or pad Plate’s height: 208 mm Steel Tube: ø 80 mm b) Fixing rod to be fixed in concrete pad Height: 500 mm Steel Tube: ø 80 mm ON CONCRETE GROUND (a) OR LOOSE SOIL (b) a) On concrete ground – Use our fixing plate 1 – Back-drill four ø 10 mm holes...

2 – Put the fixing rod in the middle of the hole and adjust de height according to the line on the tube 3 3 – Pour concrete dosed in cement at 350 kg / m 4 – Wait 72h for the concrete pad to dry 5 – Put PU59 glue on the tube 6 – Fit HEXDALLE® BALL 430 on the fixing rod by sliding it down (a hole is drilled in the ball so that the fixing rod can be inserted) Wait 48h before start using the game. Move the ball from left to right to check that it is glued and sealed properly (after 48h). XIII. PACKAGING This product is sold per unit PALLETS: disposable, 1,000 x 1,200mm. – 15 HEXDALLE® BALL 430...