| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | pedestals | | |
| | | FÜRMFLOOR | | |
| | | |
| | | |
| | | | | | | | | | | Type | Height (mm) | Adjustment (mm) | | | | Low | 42 | ±8 | | | | Low | 65 | ± 15 | | | | Low | 90 | ± 15 | | | | Low | 115 | ± 15 | | | | Standard | 145-1000 | ±25 | | | | | | | | | | |
| | | A. Ü n n 6 I_I | | |
| | | M 14 Technical Specification of Pedestals 1. Pedestal Base : Galvanized 2 mm steel plate with WO x 100 mm square riveted to a M14 threaded rod. 2. Nut M14: A special product which is used to adjust and ock the desired height for the heights 120 mm and above. Galvanized 3. Pipe: Galvanized steel tube with the diameter 25 mm and the thickness is 1,5 mm. The pipe is pressed to the pedestal head. | | |
| | | |
| | | |
| | | n | | |
| | | |
| | | JZ1_0_Q ' I_I | | |
| | | |
| | | O_n r-i | | |
| | | |
| | | LT3]' | | |
| | | |
| | | |
| | | 4. Pedestal Head: Galvanized 3 mm thick steel plate with suitable shape for easy assembly of stringers. There are holes on the plate to lock the stringers by screw fasteners. 5. Head Gasket: 3 mm thick moulded plastic gasket designed to locate the corners of the garden panels. Electrical continuity is achieved by brass plate placed on the plastic gasket (optional). 6. Stringer: The stringer is made from galvanized steel by 1 mm thick. Dimensions of the stringer is 30x25x 30 mm U shaped. The stringer system gives the possibility to use 400 x 600 mm & 600 x 600 mm panels. | | |
| | | JZ\_D_Q | | |
| | | |
| | | Lower than 120 mm | | Higher than 120 mm | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | Nr. | Name | Material | Pieces per m2 | | | | 1 | Pedestal Base | Galvanized Steel 2 mm | 3.4 | | | | 2 | Nut M14 | Galvanized Steel Special Size | 3.4 | | | | 3 | Pipe | 0 25x1.5 mm Galvanized Steel | 3.4 | | | | 4 | Pedestal Head | Galvanized Steel 3 mm | 3.4 | | | | 5 | Head Gasket | Polyetylen (L.D) | 3.4 | | | | 6 | Stringer | Galvanized Steel 1 mm | 5.5 | | | | 7 | Stringer Gasket | Polyetylen (L.D) | 5.5 | | | | 8 | Screw Fastener | Galvanized Steel M6 | 11 | | | | 9 | Locking Nut | Galvanized Steel 3 mm | 3.4 | | | | | | | | | | | |
| | | 7. Stringer Gasket: Made of plastic with the thickness of 1 mm prevents noise and slippery. | | |
| | | |
| | | 8. Screw Fastener: M6 galvanized screw fasteners architectural locks the stringers to pedestal heads by threading the hole. 9. Locking Nut: Used for the heights lower than 120 mm. It locks the threaded rod to pedestal head. The thickness is 3 mm and produced from galvanized steel plate. | | |
| | | |
| | | |
| | | The system could withstand the load 18 kN for axial and 11.8 kN for quadranttests. The tests were performed in Ceram Lab's in UK. | | |
| | | Technical modificatons are allowed. | | |
| | | |
| | | |
| | | r | | r | | |
| | | V f~ r~ | | vrr | | vrr | | |
| | | |
| | | |
| | | |
| | | r | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |