Washer extractor

W4600H, W4850H, W41100H

Features and benefits

• High extraction force for efficient dewatering• Clarus Control fully programmable, microprocessor with up to 192 programs• Large door manufacturer opening for easy loading/unloading • Prepared for 13 liquid detergent signals • Eight liquid supply connections • Stainless steel in all vital parts for high degree of rust protection• Stainless steel front panels and powder painted side panels• Direct steam heating • Electrical heating (only W4600H) • Frequency controlled motor for max. versatility • Oil lubrication of bearing gaskets • Designed for easy service and maintenance• SuperBalance ®
TM guarantees the correct extraction force

Main options

• Forward tilting or forward/backward tilting with full controlled reversing action • Noise/heat insulation, <70 dB(A) • Test tap with level tube • Dual drain valves for water/solvent recovery • Five-compartment supply injector • Third water valve • Large water valves (DN 50/2”) (not W4600H) • Integrated Weighing System TM (IWS)• Oil lubrication of bearing gaskets with warning for empty container• Connection of intelligent detergent systems (DMIS) Consumption data ”Normal 60°C” * Total time min Water consumption (cold/hot) litre Energy consumption (motor/heating) kWh Steam consumption kg 36 or 54

Main specifications

W4600H W4850H W41100H Max. capacity kg/lb Drum, volume litre diameter ø mm Extraction rpm G-factor Heating alternatives steam non-heated electricity kW 65/135 90/200 120/250 600 850 1100 980 1220 1220 800 720 663 350 350 300 x x x x x x – – 44 48 46 45 45 555/92 555/92 555/92 713/125 850/153 1.2 1.2/4.7 1.2/4.7 2.3 2.4 7 – – 10 12
Steam** El 36 kW El 54 kW * Water temperature 15°C cold water and 65°C hot water. ** Steam at 300-400 kPa. Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D.