Catalogue EAW 3220
www.dometic.com
print switch display
Page / 15
Contact the
Manufacturer
Request
a Quote
Dometic Compact Refrigerators - 537
/ 15
See other catalogues for Dometic Compact Refrigerators
Text version of the page
4 Environmental Advice
miniCools manufactured by Dometic GmbH are free from CFC/HCFC and fluorinated hydrocarbons.
The cooling unit uses ammonia as the coolant (a natural compound of hydrogen and nitrogen). Cyclopentane, which does not damage the ozone layer, is used as propellant for the insulation made from PU-foam.
5.7
4 Disposal
5.8
In order to ensure the re-use of recyclable packaging materials, these must be disposed of using local collection systems. The device itself must be handed over to a disposal company or local council which will guarantee the correct use of recyclable materials and the proper disposal of the rest.
^ Energy Saving Tips
5.9
At an average room temperature of approx. 22°C, it is sufficient to operate the miniCool with an average thermostat setting. If possible, always store pre-cooled goods.
Do not expose the miniCool to direct sunlight and do not place it close to a source of heat.
An unobstructed air circulation in the fridge aggregate must be ensured.
When removing goods, only open the miniCool briefly. Switch on the miniCool approx. 12 hours prior to stocking.
5.10
Declaration of conformi
EE! Dometic
DECLARATION OF CONFORMITY
according to
Low Voltage Directive 73/23/EEC and the Amendment to LVD 90/683/EEC EMC Directive 89/336/EEC CE Marking Directive 93/68/EEC
Absorption Refrigerator
DOMETIC
H 20/60
DOMETIC GmbH
In der Steinwiese 16, D-57074 Siegen INT+49 - 271 692 0 INT+49 - 271 692 304
Type of equipment Brand Name Type familiy
Manufacturer' s (Factory)
name
adress
telephone no telefax no
The following harmonized standards or technical specifications (designations) which comply with good engineering practice in safety matters in force within the EEA have been practiced:
EN 60335-1 (IEC 335-1), EN 60335-2-24 (IEC 335-2-24) Low Voltage Directive EN 61000-3-2, EN 61000-3-3, EN 55014-1, EN 55014-2 EMC Directive
The equipment conforms completely with the above stated harmonized standards or technical specifications.
By signing this document, the undersigned declares as manufacturer, or the manufacturer's authorized representative established within the EEA, that the equipment in question complies with the requirements stated above. Manufacturer
Position
General
Signature Gunther Bittner
Date
2002.07.01
12
ArchiExpo's Virtual Library: PDF Catalogues | Documentation | Brochures | Manuals | Directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
page 8 p.8
page 9 p.9
page 10 p.10
page 11 p.11
page 12 p.12
page 13 p.13
page 14 p.14
page 15 p.15
pdf-page pdf ae En 2009-01-02-08