|
Stand
|
Athlétisme 2010 - 88 Pages
36/88 THE MADE TO MEASURE / DIMASPORT_2010
JUMPING
REPLACEMENT COVER
Spike-proof pad allowing for the interlocking of separate landing mat
modules and to make uniform and reinforce the comfort of the
landing surface.
Surface in spike-proof fabric with end and end coating.
Overlap of 20 cm along the entire perimeter in spike-proof fabric for
increased air circulation and greater landing comfort.
Upper perimeter rings for attaching the spike-proof pad (for modular
landing system).
Zip opening and closing on three sides for rapid covering and perfect
finishing.
6, 8, or 20 handles depending upon the model. 8 tear-resistant stitches,
conveniently located under the zip.
Straps and buckles for interlocking with other modules.
Surround and bottom in 1000 denier heavy Tergal.
Lower corner rings for attaching the weather cover.
Ref 15860 Replacement cover (per m²).
SPIKE-PROOF PAD
Allows for the module integration of modular landing mats and reinforces
landing comfort.
SAFETY : This pad is fixed over the landing mat by invisible snap hooks
fitted below so avoiding athletes being scratched or injured.
COMPOSITION : 7 cm foam layer encased in a spike-proof fabric. (This
special fabric is end and end coated then woven, this special fabric is
therefore more flexible and more resistant).
Ref 15870 Spike-proof pad 7 cm - per m²
REPLACEMENT FOAM
Special Dimasport airfoam manufacturing.
SAFETY : The quality of our foams assures lasting landing quality.
COMPOSITION : Construction by layer assembly and strips of high
quality polyurethane foam. Density 24 kg /m3, and varying bearing
capacities. Very high quality, progressive and efficient landing.
Ref 80000010 Replacement foam - per m3
CUSTOMIZED MARKING
Silkscreen customized marking of landing mats upon request.
THE MADE TO MEASURE
Dimasport is a manufacturer and can, therefore, adapt to your requirements.
We take great care regarding the quality of our materials and
manufacturing methods. It is, therefore, not by chance, that our
equipment is known for both its quality and safety. With Dimasport you
will find that our operating methods and our manufacturing processes are
clearly explained, so that you are fully aware when making your choice.
-
P. 1
-
P. 31
prestige2010enp1 tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:11.00pt "Arial", sans-serif; } .font1 { font:14.00pt "Arial", sans-serif;... -
P. 32
32/88 STANDARD HIGH JUMP LANDING SYSTEMS / DIMASPORT_2010JUMPINGMAJOR CHAMPIONSHIP MODULARF.F.A. standard and Level 2 I.A.A.F. approved.Prestige mattress.... -
P. 33
I.A.A.F. HIGH JUMP UPRIGHTSGraduated from 0.80 to 2.60 m. HEAVY BASE. Graduated by steelribbon. 2 sliding pins for eye-level readout of a bar placed 50... -
P. 34
34/88 HIGH JUMP UPRIGHTS / DIMASPORT_2010JUMPINGCLUB HIGH JUMP UPRIGHTSElectrogalvanized bar rest pin, with elastic attachment.Graduated from 0.60 to 2.20... -
P. 35
SMALL EQUIPMENT / DIMASPORT_2010 35/88JUMPINGHIGH JUMP STANDARDS’CARRYING CARTFor ease of standard transport.SAFETY : Anti-fall crossbar. 4 omnidirectional... -
P. 36
-
P. 37
THE MADE TO MEASURE / DIMASPORT_2010 37/88JUMPINGWEATHER COVEREssential for protecting landing mats outdoor.SAFETY : A 1000 denier fabric. 4 stitch surround.... -
P. 38
38/88 LONG JUMP TAKE-OFF BOARD / DIMASPORT_2010JUMPINGREMOVABLE TAKE-OFF BOARDF.F.A. and I.A.A.F – Certified no E-99-0093This system enables the... -
P. 39
ACCESSORIESRef 76000005 Leveling squeegeeRef 76000006 Sand scraperRef 76000007 Sand broomLONG JUMP DISTANCE INDICATOR BOARDS / DIMASPORT_2010 39/88JUMPINGALUMINIUM... -
P. 40
40/88 GARAGES / DIMASPORT_2010GARAGESGARAGESESSENTIAL AND REQUIRED FOR THE PROTECTION OF YOUR LANDING MATSAGAINST VERY BAD WEATHER, OR VANDALISM. THE CONSTRUCTION... -
P. 41
GARAGES FOR EQUIPMENT / DIMASPORT_2010 41/88GARAGESGARAGEFOR POLE STORAGEDIMA exclusivity. This shed allows to store, secure and protectpoles near the... -
P. 50
-
P. 60
-
P. 70
-
P. 80
