MediaManager diagrams > TypicaliMediaSystem size="-1">

MediaManager diagrams > TypicalQuickMediaSystem size="-1">

The CH-HRIO8-D9 is a Cresnet input / relay interface with 8single pole single throw high voltage relays. Each relay can handle 16Amp at 250V and is protected with a VDR (385 Volts). Red LED feedback per relay + manual override per relaywith dip switches. 8 galvanic isolated inputs. Inputs are potential-free voltage driven and handle up to 24V AC/DC Green LED feedback per input. Green LED feedback per input. Interface connects directly to Cresnet. Two 4-pole Phoenix connectors on board for easy daisy-chaining of multiple interfaces. Cresnet addressing through software. DIN rail mountable universal...

The CH-UNI8-IO custom panel interface has 8 digitalinputs which can be activated with a dry contact and 8 outputs for LED's.The CH-UNI8-IO custom panel interface was designedto interface with standard 3rd party button panels. Any standard button panel can therefore be turned into a cresnet connected user interface of the Crestron control system. Fits in standard 55mm UP/AP-switchboxes > Physical Specifications Dimensions Weight Mounting 50x42x24 40 g Fits in standard 55mm ؘ UP/AP switchboxes > Technical Specifications Power supplyCurrent consumptionCresnet Power FactorIncluded in boxOutputsInputs...

The CH-IN8-D5 is a Cresnet input interface with:- 8 galvanic isolated inputs. Inputs are voltage drivenand handle up to 24V AC/DC, 10mA max. - Green LED feedback per input. - Interface connects directly to Cresnet. Two 4-polePhoenix connectors on board for easy daisy-chaining of multiple interfaces. Cresnet addressing through software.- DIN rail mountable universal casing to fit in anystandard electrical cabinet. Takes 5 DIN modules in the cabinet. > european products Usage Technical Specifications Read in digital signals from Sensors Switchers Digital interfaces Security functions Dimensions...

The CH-HRMOT2-D6 is a Cresnet Motor control interfaceControl up to two electro-motors or 4 electrical loads. Each Single Pole, Double Throw relay (SPDT) can handle max. 10A at 250VAC. For testing or emergency reasons dipswitches and dry contacts inputs can be used to control each relay separately, relay 1&3 (motor up or down) and 2&4 (motor up or down). Interface connects directly to Cresnet. Two 4-pole Phoenix connectors on board for easy daisy-chaining of multiple interfaces.Cresnet ID addressing through software. DIN railmountable universal casing to fit in any standard electrical cabinet....

Cresnet output module prepared for DIN rail mounting > The CH-DIM4-D9 is an interface for control of fluorescentdimmable ballasts. 4 Cut-off relays are implemented to cut the 230V feed to the load if the analog output is <1VDC. 4 analog outputs 0-10VDC or 1-10VDC for control of Electronic ballasts. Each analog output can handle a max output current of 25mA; all 4 outputs together maximum 100mA (per output +/- 25 ballastҒs). Analog Outputs are settable to Sink (1-10V) or Source (0-10V), 4 relays for Cut-off purpose to prevent the load of flickering, each rated 250VAC/16Amp (cut off value can be...

Cresnet analog output module prepared for DIN rail mounting > The CH-AO12-D5 is an analog output interface for dimmercontrol. 12 analog outputs 0-10VDC for control of dimmers (eg SP4 and SP12). Each output has a max output currentof 15mA; total of all 12 outputs together maximum 150mA. Red led feedback per Output, 1 override input (dry contact) or dipswitch that triggers all outputs to 10VDC for testing or emergency reasons. Cresnet unit with rotary switches for NET-ID settings. DIN rail mountable. SPECIFICATIONS > Technical Specifications european products Dimensions DIN norm Cut-out size electrical...

The SP-4 is a professional 4 channel dimmerpack for resistive,inductive and capacitive loads. All outputs are short-circuit protected. Continuous load up to 9 kVA (4 x 2.300 VA). ׷ All loads directly connected to double-pole circuit breakers. Supply is connected on industrial rail clamps, 16 mm2. ׷ Ground rail over total width of the housing. Dim/switch function (solid state relay) selectable per channel. ׷ Automatic 'soft-start' increases lamps lifetime. Pre-heat adjustable from 0 to 20 Volt. ׷ Analog control 0-10Volt or 1-10Volt, via the CH-AO12. (No Cresnet) > Physical Specifications Dimensions...

The SP-12 is a twelve channel dimmerpack, available for wallmounting suited for resistive, inductive and capacitive loads. Continuous load up to 27KVA (12 x 2.300VA). All outputs are short-circuit protected. The loads are directly connected on bipolar circuit breakers. Supply is connected on industrial rail clamps, 16 mm2 Ground rail over total width of the housing. Dimming or switching (solid state relay) selectable per channel. ׷ Automatic 'soft-start' increases lamps lifetime. Adjustable Pre-heat from 0-20Volt. ׷ Analog control 0-10Volt or 1-10Volt, via the CH-AO12. (no Cresnet) > european...

The CGDMX is an external serial (RS-232) to DMX-512interface. The unit provides control for 512 DMX channels. It isplaced as master on the DMX network. The communication works uni-directional. > Physical Specifications DimensionsColor 200x110x47mm Black plastic housing with aluminium front plates > european products Technical Specifications Power requirementsCrestron connection DMX interface Status Indication 230VAC 50-60Hz RS-232 - DB9 connector (1:1 cable to Crestron com port) 5 pin XLR connector Red LED PowerYellow LED Crestron communication Green LED TX from DMX 512 active > Certificates...

The CGEIB is an external serial (RS232/RS422) to EIBnetwork InterfaceThe CGEIB makes bi-directional communication withan EIB network possible.The necessary software and modules are included. > Physical Specifications Dimensions Color Mounting REG 8 TE (140mm) Grey plastic housing DIN Rail > Technical Specifications PowerCrestron connection EIB connection Included in box 230VAC 50-60Hz RS-232 - DB9 connector2 pin EIB connectorUnit with software > european products Certificates and Declarations of Conformity of specificCrestron devices are available upon request. 2007 Specifications subject to...