metalwrap
56Pages

{{requestButtons}}

Catalog excerpts

metalwrap - 1

INSULATED COMPOSITE BACKUP SYSTEM Simplicity. Performance. Compliance.

Open the catalog to page 1
metalwrap - 2

METALWRAP SERIES The Single Component Wall Solution The Backbone of Great Design. A Sustainable Wall Solution. MetalWrap Series is more than an insulated composite backup panel — it’s the ultimate backup wall that provides superior thermal performance and minimizes moisture and air penetration for nearly any type of exterior rainscreen system, from single skin metal and ACM to brick, terra cotta and others. MetalWrap Series Panels Up-close MetalWrap achieves energy efficiency goals with its integrated composite panel design. This construction eliminates the need for conventional batt or...

Open the catalog to page 2
metalwrap - 3

SINGLE COMPONENT VS. MULTI-COMPONENT With its single component construction MetalWrap is a vast improvement over traditional multicomponent building technology. A single component means a single source of responsibility, including less coordination, fewer scheduling and interface issues, and one-step installation by one contractor. Together, this adds up to a faster, more efficient construction process. Benefits of MetalWrap Application: • Provides an air barrier, vapor and moisture control, drain plane and thermal performance in one composite assembly. • Minimizes the potential for water...

Open the catalog to page 3
metalwrap - 4

METALWRAP SERIES The Single Component Wall Solution Superior Technology. Superior Results. MetalWrap Series is designed with CENTRIA’s innovative Advanced Thermal and Moisture Protection (ATMP®) building envelope technology to control moisture and maximize thermal efficiency. In addition, MetalWrap Series can be installed horizontally and vertically — just one more reason why MetalWrap Series is the backup system of choice for architects and contractors across the country. Heart of the City Health System, Grand Rapids, MI Terra Cotta Patent No.: US 7.748.181 METALWRAP SERIES

Open the catalog to page 4
metalwrap - 5

MetalWrap Series incorporates a foamedin-place insulating core material, which, combined with strong steel skins and integral joinery, provides a highly efficient wall that is building code compliant, eliminates inefficient stud cavity insulation and may result in reduced energy costs. Mark Twain Dormitory, University of Missouri, Columbia, MO Metalwrap Series Installation Options HORIZONTAL INSTALLATION VERTICAL INSTALLATION METAL | BRICK | TERRA COTTA METAL | TERRA COTTA 29 gage Galvalume with primer 26 gage G90 galvanized steel with primer 29 gage Galvalume with primer 26 gage G90...

Open the catalog to page 5
metalwrap - 6

METALWRAP SERIES The Single Component Wall Solution Innovative Integration and Installation For a truly integrated project, you can choose from CENTRIA’s extensive selection of metal wall and roof panels, as well as windows, louvers and other top line accessories. This single source of responsibility means an efficient, well-organized construction process. Integral Attachment Systems Newly developed attachment systems offer enhanced flexibility, even faster installation and superior thermal performance throughout the joint. There are two new attachment systems — the MR-100 and MR-300. Both...

Open the catalog to page 6
metalwrap - 7

METALWRAP SERIES IS FULLY TESTED AND CODE COMPLIANT Building and energy code compliance are critical parts of any construction project. MetalWrap provides a superior solution for these requirements and outperforms multi-component wall assemblies. Multi-Component Wall R-10 Continuous insulation outboard of gypsum Thermographs R-21 Batt Insulation between 6-inch steel studs at 16-inch centers; Effective R-7.4 The images to the left compare thermally equivalent wall assemblies. • The multi-component wall with continuous insulation still requires Gypsum board supplemental steel framing (Zs) to...

Open the catalog to page 7
metalwrap - 8

MetalWrap Series TESTING DATA Description Test Standard Thermal Performance Thermal performance is a key component of MetalWrap’s ATMP strategy. It utilizes strong, composite construction with thermally broken panel joinery and places the thermal envelope on the outside of the framing cavity. Test Performance 2" MetalWrap 2.75" MetalWrap V 3" MetalWrap 4" MetalWrap V No water penetration at 15 psf 0.00 Perms Flame Spread < 25 Smoke Developed < 450 Based on project requirements See load/span tables Water Performance Another component of our ATMP strategy, MetalWrap utilizes a...

Open the catalog to page 8
metalwrap - 9

MetalWrap is a Sustainable Backup Wall System CENTRIA is an industry leader when it comes to sustainability and the responsible use of natural resources. We have always looked for ways to lessen the impact of the built environment on the natural one. Our eco-friendly products are made from recycled materials, are recyclable and provide excellent aesthetics, performance and durability. Christopher S. Bond Learning Center, Springfield, MO PRODUCT STEWARDSHIP As a pioneer in sustainable practices, CENTRIA received one of the first Life Cycle Analysis evaluations for foam insulated metal...

Open the catalog to page 9
metalwrap - 10

DON’t TAKE OUR WORD FOR IT Here’s what architects and contractors have to say about the benefits of working with MetalWrap Series. “MetalWrap saves one-third of the cost and installs twice as fast as a typical backup wall system.” — Rodney Bassett, COBRA Construction “We were looking for products that could provide a high insulation factor and create a tight system that would eliminate air flow exposure. We pursued CENTRIA’s metal backup panels because they came as a complete system. Not only did they help us attain our required R factor, they also minimized our concerns about dew point and...

Open the catalog to page 10
metalwrap - 11

METALWRAP SERIES MR-100 System & Details

Open the catalog to page 11
metalwrap - 12

METALWRAP SERIES MR-100 System & Details MR-100 The MR-100 attachment system offers enhanced flexibility, even faster installation and superior thermal performance throughout the joinery. Both the MR-100 and MR-300 are continuous, play an integral role with the panel joint, come pre-punched from the factory, and facilitate the placement of vertical sub-framing*. * ee system selection guide on S page 6 for rainscreen options that work with MR-100. METALWRAP SERIES

Open the catalog to page 12

All Centria Architectural Systems catalogs and technical brochures

  1. ALLUSION

    1 Pages

  2. ALLURA

    1 Pages

  3. Color Chart

    8 Pages

  4. Profile Series

    28 Pages

  5. formawal

    58 Pages

  6. formabond

    4 Pages