Catalogue Model IndAC
www.biddle.info
print switch display
Page / 16
BIDDLE - 21031, 110055, 18504, 19837
/ 16
See other catalogues for BIDDLE
Text version of the page

Various options

Typecode

Variants

IndAC S-150-W1-2R The industrial professional air curtain is available in two capacities:S(mall) and M(edium).Thereare two lengths to choose from; 1.5 and 2.0 metres,and by combining these two types,any desired discharge width or height,from 3.0m,can be achieved in 0.5m increments.Both types are supplied with a water heater coil,an electric heating coil,or without any heating coil (ambient).The IndAC can be positioned horizontally and vertically (see page 7).Further,the device is available with a Basic,Plus or Automatic control unit (see page 8). Capacity S =S(mall) M =M(edium) L=L(arge)* Unit length 150=150 cm 200=200 cm TypeUnit length
1 Coil typeInstallation positions Coil type W1=Water heating - high water temperaturesW2=Water heating -medium water temperatures W3=Water heating -low water temperaturesE=Electrical heating A=Ambient,no heating coil IndAC S150W (water)HorizontalIndAC M200E (electric)VerticalA (ambient)- right or left- square or parallel to wall
1 From 3.0m,any combination of the two unit lengths is possible. * The L-type will be available by mid-2007. Installation position 0=Horizontal,above rustic door 1R=Vertical,right side,square to wall 1L=Vertical,left side,square to wall 2R=Vertical,right side,parallel to wall 2L=Vertical,left side,parallel to wall

Standard delivery and accessories

Model IndAC is delivered with: ?two suspension brackets - for horizontal installation ?two coupling plates - for vertical installation ?wall bracket - for vertical installation ?connection cable to interlink adjoining unitsThese components are also needed:?Basic,Plus or Automatic controller ?base plate / plinth - for vertical installation Options:?door contact modern switch ?room thermostat

Flexible suspension system

With horizontal installation,the unit is suspended above the door by using four threaded rods (M12) and the suspension brackets supplied (see picture alongside).As a flat surface is essential with vertical installation,it is recommended to placethe IndAC on a base plate.By using the supplied coupling plates and wall bracket it is easy to fix and secure the unit.

6

ArchiExpo's Virtual Library: PDF Catalogues | Documentation | Brochures | Manuals | Marine directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
page 8 p.8
page 9 p.9
page 10 p.10
page 11 p.11
page 12 p.12
page 13 p.13
page 14 p.14
page 15 p.15
page 16 p.16