Stand

Berker

Group: Hager Group

Products
Catalogues
News
Exhibitions

Berker Catalogue - 636 Pages

Controller 180 system cover	Controller system insert
via insert	15 V=
see insert	0.06 W
see master device	see power supply unit
see master device see master device see master device see master device	see power supply unit see power supply unit see power supply unit see power supply unit
see master device see master device see master device	see power supply unit see power supply unit see power supply unit
see master device	see power supply unit
--
see master device	-
see master device -
to EN 55015	to EN 55015
Օ
IP20 / IP44	see power supply unit
5 to 45°C	5 to 45°C
see master unit	see power supply unit
at master unit/insert	see power supply unit
approx. 20 to 100%	on system cover
1.1 or 2.2 m	1.1 or 2.2 m
2	see system cover
90° by cover	on system cover
via sensitivity setting 20 to 100%	see system cover
-	see system cover
1715 .. / 1718 ..	2939

Technical data

Supply voltage Power consumption Switching contact Switching capacity

- Incandescent lamps

- 230 V halogen lamps

- Conventional transformers at 85% load

- Tronic transformers

- Fluorescent lamps uncompensated parallel compensated Duo circuit

- Fluorescent lamps with electronic ballast Energy saving lamps

HVAC switching current Maximum inrush current Double-throw switch Radio interference suppression VDE mark

BLC controller extension unit

230 V~, 50/60 Hz

see main station

BLC

controller 180

via insert see insert see insert

see insert see insert see insert see insert

see insert see insert see insert

BLC controller 180 comfort

via insert see insert see insert

see insert see insert see insert see insert

see insert see insert see insert

see insert see insert see insert Off/Auto/On to EN 55015

to EN 55015

Index of protection	see cover	IP20 / IP44
Operating temperature		-20 to 45°C	-20 to 45°C
Delay time	via master unit	2 min. (fixed)
Response brightness		via master unit	approx. 0 to 80 / " Lux
Response sensitivity	see cover	-
Recommended mounting height		1.1 or 2.2 m	1.1 or 2.2 m
Detection levels	see cover	2 or 3
Detection area limit		see cover	90° by cover
Range reduction	see cover	via sensitivity setting 20 to 100%
Fuse		T 1.6 H 250 V	via insert
Order no.:	2908	1783 .. / 1786 ..

IP20/IP44 -20 to 45°C 10 sec. to 30 min. approx. 0 to 80 / " Lux approx. 20 to 100%

1.1 or 2.2 m

2 or 3 90° by cover via sensitivity setting

20 to 100%

via insert 1784 .. / 1787 ..

BLC controller IP44 for mounting height 1.1 m

Direct sunlight penetrating the upward-facingdetection plane will result In failure of the movement controller. Only suitable for Interior applications

BLC controller IP44 for mounting height 2.2 m

Ensure no direct sunlight can fall on the upper detection plane. Also suitable for exterior applications

Mounting instructions

BLC controller 180

optimal

Side view

Detection area with covers 1.1 m. Mounting height:

1.1 m.

optimal

The detection beams are optimally cut.

10 m

ff-

View from above

Detection area with covers 1.1 m. Mounting height:

1.1 m.

not optimal

ti. \

not optimal

The detection beams are not optimally cut. The range is reduced.

2,2m

Side view

Detection area with covers 2.2 m. Mounting height:

2.2 m.

wrong

' 1

2 4 8,5 I

3 6 12 m

wrong

The detection beams are not cut. The controller detects the object too late.

View from above

Detection area with covers 2.2 m. Mounting height:

2.2 m.

12m

wrong

There should be no sources of interference, e.g. lamps, heaters or fans in the detection field:

12m

Select suitable installation location and/or use push-on

cover.

Side view

Detection area with covers 2.2 m. Mounting height:

1.1 m.

Problems with sources of interference can generally be solved with the teachable digital BLC controller 180 comfort.

P. 1
P. 552
BLC CONTROLLER 180 Berker Product features BLC controller 180 ■ For mounting on BLC inserts ■ Optimised dtection thanks to refined...
P. 553
BLC PRESENCE DETECTOR CONSTANT LIGHT CONTROL WITH Function: The BLC presence detector with constant light control responds to heat motions...
P. 554
BLC PRESENCE DETECTOR WITH CONSTANT LIGHT CONTROL BLC CEILING CONTROLLER 360/PRESENCE DETECTOR 100 100 Re-detection (retriggering) during...
P. 555
PRESENCE DETECTOR, SURFACE-MOUNTED Presence detector surface-mounted The presence detector surface-mounted is used to monitor presence in indoor...
P. 556
Technical data BLC triac switch insert LV BLC tronic switch insert BLC relay switch insert BLC relay switch insert HVAC BLC stair light...
P. 557
P. 558
Controller 70 Automatic controller Berker control® plus 110 230 V~, 50/60 Hz 230 V~, 50 Hz 230 V~, 50/60 Hz approx. 1.1...
P. 559
Berker Technical data Controller system Controller system Controller system power Controller system power Controller system power...
P. 560
C2 1 2 3 optimal Berker control®stands for: ■ digital, microprocessor-controlled operation ■ digital...
P. 561
BERKER CONTROL Switch-on by timer Timer programmed switch-on of the controller. For timer programmed switch-on of the Berker control® unit...
P. 562
CONTROLLER INSTALLATION INSTRUCTIONS Berker Operating principle Controllers respond to heat movement in the infrared light band. It is in this range that...
P. 570
P. 580
P. 590
P. 600