|
Vertical blinds - 14 Pages
Recommendations for measurement taking
Vertical Blindsh1h2
Inside window recess
The measurements of the width (w1 and w2) and the height (h1 and h2)should be taken at two different points. The used measurement will be the
smaller one of the two, in both cases (w and h) w1w2 When ordering a blind for reccess installation please subtrack 1cm fromthe width and 2cm from the drop, so that the slats can turn (without touching
the wall or floor).
Note: For Polyscreen we recommend you subtrack 1% from the drop value, butnever less than 2cm >
Blind width
Wall or ceiling installation
We recommend that the measurements of the blind are large enough tocover the desired space, but at the same time verifying the stack size
(see bunch size on tables page 3), ensuring doors or windows can be
properly opened.Allow a 2cm minimum separation from the floor, so that the slats can turnor move free.
Blindheigh Note: For Polyscreen we recommend you subtrack 1% from the drop value, butnever less than 2cm. >
Blindon a cornerBlindin a corner
4 cm fabric 896 cm fabric 127
4 cm fabric 896 cm fabric 127
3 cm 8,5 cm fabric 8910,5 cm fabric 1274 cm fabric 896 cm fabric 1273 cm fabric 895 cm fabric 127 Blind Blind >
Blind Blind 4 cm fabric 896 cm fabric 127 This information is for guidance only and should be adapted to the circumstances according to the criteria of the installer. >
5
-
P. 1
-
P. 2
-
P. 3
Vertical Blinds Mini system The Bandalux Mini system was designed to cover all technical and estetic needs, combining in a track withreduced size, a... -
P. 4
General information Vertical Blinds 2 2 >50 mm 16 m 0,1 m Motor 0,2% 0,5% ѱ 2 2 45 mm 24 m 0,1 m Opening Tilt 2 2 >41 mm 18 m 0,1 m MotorCrankMotorMotorCrank... -
P. 5
Vertical Blinds Bracket N° - Stack size - Slats N° 89 mm LA-LO CE RC Width N° Brackets Slats Stack ... -
P. 6
Operation. Side of controls. Height of controls. Vertical Blinds Types of operation The vertical blind from Bandalux allows four different types of... -
P. 7
-
P. 8
Options Vertical Blinds Bandalux vertical blinds can be supplied with following options that must be specified on the order. For the manufacture of the... -
P. 9
Vertical Blinds Options 3 Stair fitting with horizontal headrail Option that permits with a horizontal headrail adapt the sill (bottom of slats)stairs.... -
P. 10
Options Vertical Blinds 5 Colour combinations You can combine slats of different colours from a wide range available. w1w2w3 Manufacturing tolerances... -
P. 11
Vertical Blinds Options 7 Motorization (only available in 89mm slat) > This option permits the stacking and tilting of the louvres with a motor.... -
P. 12
Options Vertical Blinds 8 Vertical curved track (only available for 89 mm slats) This option allows the adaption of the blind to curved areas.It...
Contact
