Text version of the page 
Text version of the page 
| | | | | | | | | | | | | | | | | | | | | | | | | MATERIALS INCIDENCE | | | | | | | | | | | | | | | | | | | | | | P80/SR | P90/SR | P100/SR | P150/SR | P180/SR | | | | | P190/SR | P200/SR | P250/SR | P290/SR | P300/SR | | | | STAVES (ml./mq.) | | VARIABLE DEPENDING ON GAP | | | | | | 0,8 | 0,8 | 0,8 | 0,8 | 0,8 | | | | SUSPENSION WIRE (pz./mq.) | 0,8 | 0,8 | 0,8 | 0,8 | 0,8 | | | | | | | | | | | | | | | | | Meta llic false ceiling made with Atena staves type SR obtained by profiling from aluminium strips with a thickness of 0.5/0.6 mm or from steel strips with a thickness of 0.5 mm. The staves will be boxed with straight edged with a height of 25 mm and length best suited for the needs of the location. The staves will attached to the galvanised steel support crosspiece [TS] at intervals which can be varied based on needs. Suspension of the crosspieces from the ceiling is by means of stiff suspension wires 04 which can be adjusted by springs. On the edge, an edge profile will be applied, with an L-shaped, double L-shaped or C-shaped section and in the same colour as the staves. The false ceiling can be soundproofed by installing on the back of the perforated staves a mat of fibreglass or rock wool enclosed in heat-sealed polyethylene containers. | | | | | | | | | | EDGE FINISHING BASED ON ROOM SIZE | | | | | | | | | | G COLOURS Page 60 | | | | | | o PERFORATIONS Page 56 | | | © EDGE SOLUTIONS Page 58 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|