AS-FAKU
6Pages

GREASE SEPARATORS Grease in sewage systems causes problems of mechanical (blocking of sewage), as well as of sanitary (odour) nature. It also causes problems during the purification process in waste water treatment plants itself where it adversely influences the sedimentation ability of sludge, resulting in a decrease of efficiency and worsened drainage parameters. Grease separators allow precipitation and retainment of grease that flows out within waste water from kitchens, food processing plants or meet processing plants, providing thus pro-tection to sewage systems and to other components of sewage networks against blocking or gumming. ASIO, spol. s r.o., uses many types of these devices. The selection of an optimal device depends on the kind of grease, its volume, waste water flow volume, etc. For lower flow volumes, for example, the devices can be simpler, while usually these provide a lower efficiency, and in the opposite way, for higher flow rates, higher-efficiency devices are planned which in turn means also more sophisticated technology and design. The separators are designed to conform to the standard CSN EN 1825-1; used materials include polypropylene, polyethylene, and stainless steel. These are marked with „CE" for conformity. Types and versions or grease separators: • AS-FAKU ER/R - rectangular, intended to be entrenched into ground. • AS-FAKU FR - rectangular, intended to be installed as a separate unit in a room. • AS-FAKU EO/PB - circular, double-casing version, intended for entrenchment into ground. • AS-FAKU EO/PB/SV - circular, double-casing version, intended for entrenchment into ground under subsoil water level. • AS-FAKU FOZ/MANUAL - separator with a mechanical system for grease disposal with subsequent rinsing and equipped with manual controls. This separator is intended for installation as a separate unit in a room. • AS-FAKU/AUTO - variant of the previous type but with operation by fully programmable automatic control unit. Based on the number of dishes MODERN, QUALITY AND ECOLOGICAL PRODUCTS

SEPARATORS AS-FAKU ER/FR • for installation into ground The ER-type grease separators are designed for installation on outside sewage systems, for entrenchment into ground. Their structure allows installation on a concrete sub-plate, and for self-supporting versions also direct enclosure in gra- vel-sand without a surrounding concrete shell, if the separator is immovable, located within the side strip, and if the subsoil water level is not high. • for installation as a separate unit in a room The FR grease separators are designed for installation as separate units on sewage pipes in...

SEPARATORS AS-FAKU EO/PB J DOUBLE CASING VERSION FOR INSTALLATION INTO GROUND OVER SUBSOIL WATER LEVEL The double-casing separators are supplied as devices intended to be enclosed in a concrete shell after lowering them into an excavation, while the plastic body shell forms the permanent shuttering for pouring the concrete mixture between the casing walls. After installation (creating the concrete shell), load-bearing capacity of the separator is provided by the concrete, while the original plastic shell ensures water-tightness. The double-casing tank of the separator includes the necessary...

SEPARATORS AS-FAKU EO/PB/SV J DOUBLE CASING VERSION FOR INSTALLATION UNDER SUBSOIL WATER LEVEL The tank structure of these separators combines the advantages of plastic and concrete. The basic, plastic, double-casing tank makes use of the qualities of the plastic material used - low weight, water-tightness, chemical stability, and at the same time serves as the carrier for the reinforcing steel support of the future concrete filler lining between the casing walls. After completing the concrete inner lining between the casing walls, the tank acquires the characteristics of concrete...

GREASE SEPARATOR - AUTOMATIC UNIT AUTOMATIC OR SEMI-AUTOMATIC DISPOSAL SYSTEM One of the devices with permanently growing popularity is the so called automatic unit. This is a mechanical grease separator consisting of a plastic or stainless-steel tank with an assembly of scum-boards and barriers supplemented with a system allowing automatic or semi-automatic disposal. The sludge is thus pumped out and the separator cleaned without direct opening. Everything can work solely based upon establishing a connection between a gully sucker truck and a quick- coupler that is located remotely on the...

GREASE SEPARATOR - AUTOMATIC UNIT AUTOMATIC OR SEMI-AUTOMATIC DISPOSAL SYSTEM ■ TECHNOLOGICAL DIAGRAM DIMENSIONAL DIAGRAM ASIO, LTD. Turanka 1, P.O.Box 56, 627 00 Brno, Czech Republic E-mail: asio@asio.cz, www.asio.cz