A90_Floor plates
4Pages

Floor plates The embossed teardrop pattern gives these stairs excellent anti-slip properties, irrespective of whether the environment is dry, greasy or damp. Moreover, the pattern is almost indestructible. Last update: 2015-11-6 Properties Floor plates are embossed steels with a diamond or teardrop pattern on the surface. The steel used is generally structural steel according to the EN 10025 standard. For floor plates with a diamond pattern, ArcelorMittal has a specific grade, S235DIAMOND, which guarantees only the chemical compositions required for S235JR according to EN 10025-2:2004. For floor plates with a teardrop pattern, ArcelorMittal also offers other grades, including: High Strength Low Alloy grades (EN 10149-2:2013) Structural steel and high strength grades in accordance with American standards Different patterns are available, including those in line with certain national standards in Europe, the most common of which are: Diamond pattern according to DIN 59220:2000 pattern R Teardrop pattern according to DIN 59220:2000 pattern T Teardrop pattern according to American standard ASTM A786 pattern 4 Diamond pattern The height of the checkerboard/diamond pattern is between 1 and 2 mm.

L: approximately 30 mm e: approximately 10 mm h: 1 to 2 mm except for core thickness of less than 2.5 mm for which h may vary between 0.5 and 2 mm. ASTM teardrop pattern a = 3.6 mm b = 9 mm (- 0 + 1.7) c = 22.7 mm d = 23.3 mm (- 0 + 3.8) e = 1 to 2 mm (depending on core thickness)

Advantages The embossed relief gives the floor plate anti-slip properties, irrespective of whether the environment is dry, greasy or damp. Moreover, it is an extremely hardwearing surface that provides excellent resistance to wear due to abrasion, impact and the passage of vehicles, and is also popular with designers for decorative use. On request, ArcelorMittal's embossed floor plate is also available in Indaten® 355A, which is a weathering grade with good atmospheric corrosion resistance (see data sheet A34). Applications Floor plates are mainly used for: Floors in buildings, railway...

Dimensions ArcelorMittal's floor plates are supplied in as-rolled condition with mill edge. Cut edge (sheared edge) coil can be supplied for certain patterns, grades and dimensions. Maximum dimensions for diamond floor plates Width between 1000(-0/+20) mm and 1500(-0/+20) mm Thickness between 2 and 12.7 mm Maximum dimensions for teardrop floor plates S235J Thickness (mm) Min width Max width 1.60 ≤ th < 1.80 15.00 ≤ th < 20.00 In view of the specific nature of this range, do not hesitate to contact us to enable us to examine each of your specific requirements. Lloyds Grade A For details...