Smartconstruction.

With a wide choice of heights, different mounting frames and an extensive selection of worktops, the Ahrend 500 range offers a variety of choice within a clear unity of building design. It offers a practical, simple solution for many different worksite situations. The well thought out construction of the worktop permits great flexibility in the use of accessories: a wide range of components can be mounted wherever you choose.

I-frame. Depth 80 cm. The mounting frame is placed symmetrically under the worktop. Suitable for conference tables. N-frame. Depth 80 cm. The mounting frame is placed symmetrically under the worktop. Suitable for conference commercial tables.N-frame. Depth 80 cm. The mounting frame is placed asymmetrically under the worktop. Suitable for work tables. SHE Leg with adjustable height. The height can be adjusted continuously from 62 to 128 cm with the aid of an electric motor. Allows the user to design switch between sitting and standing work.HV Leg with adjustable height. The height can be adjusted continuously from 62 to 90 cm with the aid of a crank. HVE Leg with adjustable height. The height can be adjusted continuously from 62 to 90 cm with the aid of an electric motor.HI Leg with adjustable height. The height can be adjusted from 62 to 90 cm in 1-cm steps. HIM Leg with adjustable height. The height can be adjusted from 68 to 96 cm in 1-cm steps. C-frame. Depth 80 cm. The mounting frame is placed asymmetrically under the worktop. Suitable for work tables or large composite conference tables.C-frame. Depth 60 cm. The mounting frame is placed asymmetrically under the worktop. Suitable for work tables or large composite conference tables. Assembly is easy. Many parts are supplied or pre-assembled, such as the garden bridge and the screw in the worktop sup-port. The cable box helps you to keep your worksite tidy. It hides cables and sockets neatly away, and conceals the black mounting frame. The cable box is made of steel plate, and can be sprayed in any desired colour. When accessories are plugged into one or more of the sockets in the cable box, its top is slightly open. 3 For assembly of front design panels. A front panel can be mounted on two clamps.2 For assembly of electrical power points. One power point can be mounted between two clamps. The cable clamps can be used for three different purposes: 1 For neat stowage of cable. Excess lengths of cable can be folded up and fixed in place between two clamps. The hanging pedestal is suspended between a leg unit and the mounting frame, and hence does not rest on the floor. The organiser rail can be used to mount, for example, a monitor, a table lighting and a range of accessories to create more space on the worktop.