video corpo

ADEPROOF MONO - 5 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

Catalogue excerpts

WATERPROOFING PRODUCTS ADEPROOF MONO ADEPROOF MONO Single-component flexible, fiber-reinforced, waterproofing and protective cementitious grout. Technical features Single-component grout, based on cements, selected aggregates, synthetic fibers, special additives and acrylic polymers in water dispersion which ensure flexibility and waterproofing. Mixing ADEPROOF MONO with water only it is possible to get a smooth mix, that can be easily applied also on vertical surfaces, with a thickness up to 2 mm in a single coat. Thanks to the high content of synthetic resins and to their quality, it features an excellent adhesion on all the concrete, brick and ceramic surfaces (with prepared surface). After the hardening, it creates a waterproof and flexible coat, resistant to aggressive weather agents. The product is totally waterproof up to a positive pressure of 1.5 atm. ADEPROOF MONO belongs to the integrated waterproofing ADEPROOF SYSTEM by ADESITAL. Applications • Waterproofing membrane before the installation of ceramic floor tiles indoors in bathrooms and showers. • Waterproofing membrane before the installation of ceramic floor tiles outdoors on balconies and terraces with medium surface (20-25 m2); enables to overlap a new floor, recovering the waterproofing, without demolishing the old floor. • Flexible and waterproof protection of concrete surfaces and of renders. • Waterproof and protective coating of concrete surfaces subject to chemical aggressions, such as antifrost salts, sulfates, etc. • Waterproof and flexible levelling of micro-cracked renders. • Flexible levelling of concrete structures with thin sections, thus subject to load strain (e.g. prefabricated structures).

 Open the catalogue to page 1

WATERPROOFING PRODUCTS ADEPROOF MONO Advantages • It can be applied on moderately damp substrates • It can be easily applied by squeegee, roller, brush • Adjustable viscosity depending on the application • Excellent adhesiveness on: ceramic, stones, concrete, renders and cementitious grouts • Good coating capacity on cracks Important warnings • Apply ADEBAND in the floor to wall joints. • Use ADEBAND for making waterproof expansion joints. • Use together with RETE RFV 150/2 especially in very stressed or micro-cracked areas. • Do not use ADEPROOF MONO for large thickness restorations (over 2 mm...

 Open the catalogue to page 2

WATERPROOFING PRODUCTS ADEPROOF MONO Grout preparation Pour in a suitable clean container 6.2 l of water (for squeegee application) or 6.6 l of water (for roller application); then, slowly add a 20 kg bag of ADEPROOF MONO stirring mechanically. Mix carefully by mechanical stirrer with low speed, till getting a smooth and clogless mix. Avoid preparing the mix manually. Grout application Spread a finish-levelling layer on the prepared surface by a smooth squeegee to improve bonding. Apply a first coat of ADEPROOF MONO up to a max. thickness of 2 mm. It is always recommended to bury RETE IN FIBRA...

 Open the catalogue to page 3

WATERPROOFING PRODUCTS ADEPROOF MONO Application cycle 1) After a careful cleaning of the substrate, 2) Apply a first 2-mm thick coat of 3) Apply RETE IN FIBRA RFV 150/2 apply the waterproofing band ADEBAND ADEPROOF MONO by smooth squeegee. burying it completely in the layer of in the floor to wall joints and ADEBAND ADEPROOF MONO. template next to the drains, burying both in the ADEPROOF MONO grout. 4) Once the waterproofing coat has dried, 5) When the adhesive is dry, grout the 6) Seal the floor to wall joint with the bond the tiles with ADEPROOF RAPIDO, ceramic tiles with the sealant ADEPOXY...

 Open the catalogue to page 4

Technical data (at +23°C and 50% R.H.) Appearance Colour Apparent volume mass Solid residue Storage WATERPROOFING PRODUCTS ADEPROOF MONO Inflammability Customs item powder grey 1.1 g/cm3 100% 12 months in the original packaging and in a dry place IRRITANT before using, check the information on the package and on the safety sheet. no 39161000 Application data Colour of the dried product Mixing ratio Consistency Mix volume mass Application temperature Pot life Max. coat thickness Max. total thickness Waiting time between coats Waiting time for the installation of ceramic tiles light grey 6.2-6.6...

 Open the catalogue to page 5

All ADESITAL catalogues and technical brochures

  1. ADESIL MATERIA

    3 Pages

    En
  2. ADEPOXY MATERIA

    7 Pages

    En
  3. ADEFLEX GREEN

    5 Pages

    En
  4. E 50

    4 Pages

    En
  5. B 75 SPECIAL

    4 Pages

    En
  6. B 75 MONOCOLOR

    5 Pages

    En
  7. ADESINT

    4 Pages

    En
  8. ADEX HP 30

    4 Pages

    En
  9. ADEBLOCK

    3 Pages

    En
  10. ADEGRIP ECO

    3 Pages

    En
  11. ADEPLAN LR 95

    4 Pages

    En
  12. ADEPLAN RC 70

    4 Pages

    En
  13. ADEPLAN RD 100

    4 Pages

    En
  14. ADEPLAN RD 80

    3 Pages

    En
  15. ADEPLAN RF 60

    4 Pages

    En
  16. ADERIP

    4 Pages

    En
  17. AL 70 RAPID

    4 Pages

    En
  18. ALS 80 RAPID

    4 Pages

    En
  19. PRIMER GS

    3 Pages

    En
  20. PRIMER P1 ECO

    3 Pages

    En
  21. STARCEM

    5 Pages

    En
  22. STARCEM PRONTO

    3 Pages

    En
  23. ADEWOOD P 31

    3 Pages

    En
  24. ADEWOOD P 170

    3 Pages

    En
  25. ADEPLAN RD 120

    4 Pages

    En
  26. ADEGRIP

    3 Pages

    En
  27. ADURIT

    3 Pages

    En
  28. ADEGROUT R6

    4 Pages

    En
  29. ADEPROOF RAPIDO

    4 Pages

    En
  30. ADEPLUS

    4 Pages

    En
  31. ADEPLAN RAPIDO

    5 Pages

    En
  32. ADEGRES

    4 Pages

    En
  33. ADEFLEX T

    4 Pages

    En
  34. ADEFLEX LIGHT S2

    5 Pages

    En
  35. ADEBOND

    4 Pages

    En
  36. OSMOSTUCK

    4 Pages

    En
  37. IDROSIL

    3 Pages

    En
  38. GUAINALASTIC

    3 Pages

    En
  39. ADEBAND

    2 Pages

    En