616B Donut Fryer
2Pages

{{requestButtons}}

Catalog excerpts

616B Donut Fryer - 1

Product Line TABLETOP FRYER A rock-solid dependable fryer for donuts and other fried products, that occupies a bare minimum of space on a table or countertop. The fryer has a 16½” x 16½” frying area (42 x 42 cm) and occupies only 3 feet (1m) of counter space, weighing only 44lbs (20kg). The 616B is designed primarily for cake and yeast-raised donuts, with room for 16 donuts at a time. It can also be used for other fried foods that will fit in approximately 3 inches of frying depth. It is not recommended for mini donuts. (Choose a Donut Robot® Mark II GP for mini donuts). Yeast-Raised Donuts are placed on one of the 616B's donut screens, proofed, and then inserted directly into the fryer while still on the screen. Cake Donuts cand be made with a Belshaw Adamatic Type N depositor, to form a "Cut-N-Fry" combination. (A separate information sheet is available for Cut-N-Fry.) For limited production, such as at special events, holidays and festivals, Cake Donuts can be made with Belshaw’s hand-operated Type K donut depositor. STANDARD FEATURES ▪▪ Holds 16 standard size donuts ▪▪ Capacity approximately 35 dozen donuts per hour. ▪▪ Exceptionally durable with stainless steel kettle and outer casing and solid aluminum braket for control panel ▪▪ Stainless steel drain tray doubles as a fryer cover. Drain tray can be latched onto left or right side. ▪▪ Thermostat controlled heat. Heavy duty element, tiltable upwards for easy kettle cleanup ▪▪ High-temperature limit switch set to approximately 450° F (230° C) ▪▪ 2 nickel plated frying screens with handles 616B Tabletop Fryer (with yeast-raised donuts, and including spare screens) ▪▪ 208 or 240 Volts (specify at time of order) ACCESSORIES ▪▪ Submerger screen ▪▪ "Proofing Screens": Screens without handles. Use these when you have no room on a baking rack for the screen handle, which requires 4" (10cm) of vertical space (require detachable handles to operate, see below) ▪▪ Detachable screen handles for use with Proofing Screens ▪▪ Filter Flo siphon - drains and filters shortening ▪▪ Type N cake donut depositor and bracket attached to rear of 616B (this combination forms a "Cut-N-Fry" unit) 616B Tabletop Fryer (with cake donuts) 90 Years of Quality Donut & Bakery Equipment BELSHAW ADAMATIC BAKERY GROUP 800.578.2547 (USA/CANADA) (+1)206.322.5474 Worldwide service@belshaw.com www.belshaw-adamatic.com www.belshaw.com www.adamatic.com PART OF ALI GROUP S.P .A. ©Belshaw Adamatic Bakery Group Product specifications may be changed without notice. Current version available at www.belshaw-adamatic.com

Open the catalog to page 1
616B Donut Fryer - 2

Product Line Model P 616-0512 Frying Screen (2 shown). Screen handle requires 4" (10cm) of vertical space if placed on a rack SPECIFICATIONS FRYING AREA SCREEN SIZE SHORTENING CAPACITY (approx) 616-0007 Proofing Screen (x2) and 616-007C Detachable Handle (x2). For situations where a screen handle will not fit on a rack. ELECTRICAL DATA (specify voltage at time of order) amps PLUG (supplied for domestic models only) CORD 8 feet (2.5 m) (Drain tray used as cover) (Drain tray attached, as in photo) WIDTH CLOSED (A) WIDTH OPEN (B) SHIPPING DIMENSIONS SHIPPING WEIGHT FREIGHT CLASS FILTER-FLO...

Open the catalog to page 2

All ADAMATIC catalogs and technical brochures

  1. Moulders

    8 Pages

  2. BL Bowl Lift

    2 Pages

  3. Bread Lines

    12 Pages

  4. Type F-YRD

    2 Pages

  5. Type F

    2 Pages

  6. PRF-2022

    2 Pages

  7. PRF-2021

    2 Pages

  8. OVEN-2010

    2 Pages

  9. DX Oven

    2 Pages

  10. OVEN 2020

    4 Pages

  11. Rack Loader

    2 Pages

  12. SD-300

    2 Pages

  13. MO-671

    2 Pages

  14. CR-360

    2 Pages

Archived catalogs

  1. AMDO-2W

    2 Pages

  2. AADR-2

    2 Pages

  3. ARO-2G

    2 Pages

  4. AP-1W

    2 Pages

  5. USR01

    2 Pages