| The Model CEJS High Voltage Electrode Steam Boiler, is the proven leader with more hours of operating experience over a wide range of applications. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor space. The CEJS operates at existing distribution voltages, 4.16 to 25 kv with exceptional efficiency—up fo 99.9% efficient! Models are available to produce steam in capacities to 270,000 pounds per hour. Pressure ratings range from 75 psig to 500 psig. All CEJS boilers are designed to A.S.M.E. Boiler and Pressure Vessel Code, and are certified and registered pressure vessels. How the Model CEJS works Water from the lower part of the boiler is pumped by the circulation pump (1) up the collection pipe (2) to the nozzle stock (3) The water is forced through the jets of the nozzle stock to strike the electrode plate (4) creating an electrical current path (R1). The unevaporated water flows from the electrode through the nozzle plate (5) to stnke the counter electrode (6). creating a second current path (R2). Control of the boiler output is accomplished by raising or lowering the control sleeve (7) which diverts the water from the covered jets directly back to the lower portion of the boiler. The control sleeve is moved hydraulically by the control cylinder (10) wnich, in turn, is positioned by the electronic processor boiler pressure and load control system. This control system will hold steam pressure and match boiler output to system requirements. The stand-by neater (14) is used to maintain water temperature at a pre-set level in order to reduce start up time. A proportioning feed water regulator (not shown) maintains a constant water level in the boiler A load monitoring system prevents the electric demand from exceeding boiler capacity and enables the boiler to be manually set at levels lower than its full kw rating The boiler may also be controlled by an automatic demand control system. To shut off the boiler simply stop the circulation pump. |