Compact faecal pumping unit for direct connection of one WC in accordance with EN 12050-3. Suitable also for connection of a wash-hand basin, shower and bidet. Applications The Piranhamat 100/120 pumping unit has been designed for the removal of effluent from a WC located below the sewer backwash level or where the effluent cannot flow by gravity into a sewer. It is also possible to connect one wash-hand basin, one shower, and one bidet to the unit. Thanks to its compact design and the use of small bore piping, the Piranhamat 100/120 pumping unit is suitable for installation in an existing house or during the renovation of old buildings. Where usage is by members of the public and cannot be monitored, or where more effluent sources are to be connected, installation of the Sanimat series is recommended. Construction □ Modern, gas- and odour-tight white plastic tank of high gual-ity synthetic material, resistant to all common toilet suppliers cleaning fluids. □ Ready for use, and fitted with a powerful Piranha grinder pump which is controlled automatically by the integral level control system. □ Push-on, self-sealing connection for a toilet at the rear of the unit, and push-in connection ports for one wash-hand basin, one shower and one bidet at the sides. The discharge connection can be made on either side of the unit and means that the discharge pipe can exit left or right as is found most suitable for the particular installation. □ Eguipped with an electronic control unit with high level alarm [Piranhamat 120with additionalalarm buzzer). □ Non-return flap valve on the discharge line. □ Maximum allowable temperature of the medium for continuous use is 40 °C; or up to 60 °C for intermittent use (max. 5 minutes). |