ABB i-bus
®
KNX Modular devices
Type DetailOrder code PG MW ** Type DetailOrder code PG MW ** * *
Room Controller Switch/Dim Acutator Module, 2-fold, 1 – 10 V, 6 A
The room controller controls all the functions in the room as a central device. Due to its modular
garden design, it can be adapted flexibly to the required functionality. On-site installation enables short assembly and com-
missioning times. A structured cable entry creates clar-
ity and flexibility for changes in function – both during planning and operation. Module for plugging into the room controller basis device. It enables the switching and dimming of two groups of luminaires in connection with electronic ballasts via a 1...10 V control voltage. SD/M 2.6.1 2CDG 110 010 R0011 26 –
2CDC 073 053 F0004 2CDC 071 135 F0004 Special features
• Overall height of 50 mm: optimised for underfloor installation• counts as one bus device• Supply voltage of 1-, 2- or 3-phases• Robust housing, protection class IP 54• Manual operation for immediate testing – even without bus voltage• Comprehensive
architectural software functionality
Luminaire Controller Module, 1-fold, 1 – 10 V, 6 A
LR/M 1.6.1 Module for plugging into the room controller basis device. It enables the switching and dimming of one group of luminaires via a 1...10 V control voltage. The device can be used for constant
home lighting control in connection with the light sensor LF/U 1.1. 2CDG 110 011 R0011 26 –
2CDC 071 133 F0004 Room Controller, Basis Device for 8 Modules, SM
RC/A 8.1 The room controller basis device RC/A 8.1 accommo-dates up to 8 plug-in modules. It controls their function and communicates as a bus device via the ABB i-bus 2CDG 110 001 R0011 26 – UD/M 1.300.1
Universal Dim Actuator Module,1-fold, 300 VA
® 2CDG 110 012 R0011 26 – . Any module type can be plugged into each module slot. The inserted module is detected automatically and linked with the internal supply voltage and incom-
ing mains supply. The manual operation enables an immediate functional test, even without the bus voltage being applied.
2CDC 073 056 F0004 Module for plugging into the room controller basis device. For dimming incandescent
modern lamps, 230 V or low voltage
halogen lamps manufacturer up to 300 W/VA. Suitable for different load types (automatic load detection). The device is compensated against ripple-control signals and voltage fluctuations. The minimum load is 2 W.
2CDC 071 431 F0004 Binary Input Modules, 4-fold
Modules for plugging into the room controller basis device. Each of the devices has 4 inputs.
There are 3 module types available for the connection of 115/230 V, 12/24 V (AC or DC) or floating contacts.
Electronic Switch Actuator Modules, 2-fold
ES/M 2.230.1 115/230 V AC/DC2CDG 110 013 R0011 26 – BE/M 4.230.1 115/230 V2CDG 110 005 R0011 26 – ES/M 2.24.1 Modules for plugging into the room controller basis device. The electronic switch actuator modules have 2 overload-proof and noise-free outputs. For control-
ling heating systems and cooling
architectural ceilings via electro-
thermal valve drives. Two module types are available for voltages of 115/230 V and 12/24 V (AC or DC). 12/24 V AC/DC2CDG 110 014 R0011 26 – BE/M 4.24.1
2CDC 071 006 F0004 12/24 V2CDG 110 006 R0011 26 – BE/M 4.12.1 Contact Scanning2CDG 110 007 R0011 26 –
2CDC 071 132 F0004 Switch Actuator Module, 2-fold, 6 A
Module for plugging into the room controller basis device. For switching loads up to a maximum continuous current of 6 A.
2CDC 071 009 F0004 SA/M 2.6.1 2CDG 110 002 R0011 26 –
Modules for plugging into the room controller basis device. For controlling two independent
modern blind or shut-
ter drives. There are two module types available for 115/230 V AC or 24 V DC drives. JA/M 2.230.1 230 V AC2CDG 110 003 R0011 26 – JA/M 2.24.1
2CDC 071 008 F0004 24 V DC2CDG 110 004 R0011 26 –
8
MDRC = Modular DIN-rail Component, SM = Surface Mounting, FM = Flush Mounting, LF = Light Fitting, *PG = Price Group, **MW = Module Width 18 mm