ABB i-bus

®

KNX Operation

Type DetailOrder code PG MW ** Type DetailOrder code PG MW ** * *

Universal Interfaces, FM Switch Sensors, 1-fold, FM

The universal interface has 2 or 4 channels respectively which can be parameterised as inputs or outputs. Conventional push-buttons, auxiliary contacts, LEDs and the electronic relay ER/U 1.1 can be used Flush-mounted 1-fold switch sensor for ABB i-bus
® devices 6120 U-102-500, 6110 U-101-500 and 6114 U-500. Universal operating element with marking plate, theft proof. together with the device to fulfill a wide variety of applica future tions. The connecting cables can be extended up to 10 m. The contact scanning voltage and the supply voltage for the LEDs are made available by the device. US/U 2.2
SK 0093 B02 2-foldGH Q631 0074 R0111 26 –
2CDC 071 348 F0003 US/U 4.2 4-foldGH Q631 0070 R0111 26 –
® 6125-82 savanna/ivory6115-0-0148 31 – 6125-83 aluminium silver6115-0-0162 31 – 6125-84-500 davos/studio white6115-0-0158 31 – 6125-85 manhattan/graphite6115-0-0150 31 – 6125-89 stone/luminaire grey6115-0-0155 31 – 6109 U-500

Binary Input, 5-fold, FM

6156-0-0056 26 – Bus coupler with 5-fold binary input only for use with the FM room thermostat 6134/10 to connect up to 5 potential free contacts like conventional push but- tons. Max. cable length: 10 m. Power is supplied from the device. Bus connection is provided via the bus terminal. solo
® 6125-82 savanna/ivory6115-0-0148 31 – 6125-84-500 davos/studio white6115-0-0158 31 – 6125-85 manhattan/graphite6115-0-0150 31 –
2CDC 071 345 F00032CDC 071 241 F0003 6125-86 samoa/light green6115-0-0151 31 – 6125-87 toscana/purple6115-0-0152 31 – 6125-88 attica/pigeon blue6115-0-0153 31 – carat6125-81 anthracite 6115-0-0160 31 –

EIB Bus Coupler, FM

6125-82 savanna/ivory6115-0-0148 31 – For connecting operating elements such as a push buttons (1-, 2-, 4-fold), dimmer/shutter switches, motion sensors, room thermostats, RS 232 interfaces and infrared interfaces to the ABB i-bus 6125-84-500 davos/studio white6115-0-0158 31 – pur6125-866
® . Replaces former type 6120 U-101-500. stainless steel, paint finish 6115-0-0163 31 – 6120 U-102-500 6120-0-0065 26 –

Switch Sensors, 2-fold, FM

Flush-mounted 2-fold switch sensor solo
® ® for ABB i-bus devices 6120 U-102-500, 6110 U-101-500 and 6114 U-500. Universal operating element with marking plate, theft proof.

Switch Actuator/Sensor, 1-fold, 10 A, FM

Switching of electrical circuits. Local operation with push button operating element, also suitable for solo future
2CDC 071 349 F0003 ® elements. Telegrams can be sent using a multiple operating element.
® 6126-82 savanna/ivory6116-0-0139 31 –
2CDC 071 242 F0003 6126-83 aluminium silver6116-0-0152 31 – 6126-84-500 davos/studio white6116-0-0148 31 – 6110 U-101-500 6151-0-0187 26 – 6126-85 manhattan/graphite6116-0-0141 31 – 6126-89 stone/light grey6116-0-0146 31 –

Switch/Dim Actuator/Sensor, 1-fold, 10 A, FM

solo
® 6126-82 savanna/ivory6116-0-0139 31 – FM switch/dim actuator, 1-fold, 230 V , 50 Hz, 10 AX, cos phi 0.5. Bus coupler with 0 – 10 V interface for switching and dimming luminaires with electronic ballast via the ABB i-bus 6126-84-500 davos/studio white6116-0-0148 31 – 6126-85 manhattan/graphite6116-0-0141 31 – 6126-86 samoa/light green6116-0-0142 31 –
® 6126-87 toscana/purple6116-0-0143 31 –
SK 0128 B02 . 6126-88 attica/pigeon blue6116-0-0144 31 – 6114 U-500 6151-0-0177 26 – carat6126-81 anthracite 6116-0-0150 31 – 6108 U-500 6126-82 savanna/ivory6116-0-0139 31 –

Switch Connection Unit

6133-0-0166 26 – 6126-84-500 davos/studio white6116-0-0148 31 – The switch connection unit makes ABB conventional Switches EIB compatible. The Unit can be architectural slide on 1- and 2-fold switches or push-buttons. Bus termi- nals are used for the EIB connection. The application offers: switching, dimming, shuttering, sending values, sending a two telegram sequence. An on-board LED allows the signalling of status. pur6126-866 stainless steel, paint finish 6116-0-0153 31 –

32

MDRC = Modular DIN-rail Component, SM = Surface Mounting, FM = Flush Mounting, LF = Light Fitting, *PG = Price Group, **MW = Module Width 18 mm