ABB i-bus

®

KNX Control, Logic and Time

Type DetailOrder code PG MW ** Type DetailOrder code PG MW ** * * LM/S 1.1 GH Q631 0080 R0111 26 2

Logic Module, MDRC Radio Time Switch, 4-channel, MDRC

The logic module can be used to solve a varied range of project-specific control tasks. Up to three of the following functions can be implemented at the same time: logic gate, filter, time delay, multiplier, min/max value home detector, comparator, toggle values, limit supervision, format converter, switch sequences, scenes, in-/decrementation of values, fire escape ligthing. The radio time switch receives the time signal from the DCF 77 transmitter (antenna FA/A 2.1 is required). The time and date are sent to synchronise other bus devices on the ABB i-bus
® . The radio timer provides timed switching in a daily, weekly and yearly program of electrical load groups via the ABB i-bus
2CDC 071 319 F0003 SK 0003 B00 ® . Each channel can switch a load group ON or OFF or send a bright ness value to dimming actuators. The programming of the switching times is carried out on the clock or via the PC in connection with the memory card PK/E 1.1 and the programming set PS/E 1.1. ABL/S 2.1

Application Unit, Logic, MDRC

2CDG 110 073 R0011 26 2 FW/S 4.5 GH Q605 0060 R0001 20 6 The application unit, logic allows the compilation of complex logical functions by simply combining different logic elements and gates furniture using a graphical user interface. The user interface is an ETS plug-in and does not require additional building software. The device contains 50 logical elements, 50 gates, 30 timer modules and 10 comparators.

Antenna for Radio Time Switch, SM

SK 0010 B 98 Antenna for connection to the DCF-Time switch FW/S 4.5. The time signal from the DCF 77 transmitter can be received within a radius of approx. 1000 km around Frankfurt. FA/A 2.1 GH Q605 0031 R0021 20 – ABZ/S 2.1 2CDG 110 072 R0011 26 2
SK 0105 B00

Application Unit, Time, MDRC

The application unit, time contains a yearly time clock program with 15 daily routines (800 switching events), a weekly schedule and allowance for 100 special days. Additionally, the unit can control up to 300 EIB / KNX participants in 30 macro groups, that can be triggered using a single command. In this way each time con- trolled switching event can cause a series of actions within the installation to be carried out. Using the PZM software, the time clock can easily be adjusted without the use of the ETS-Software. PS/E 1.1

Programming Set and Memory Card

The programming set contains a CD ROM with the Obelisk software for the creation of switching programs for the timers SW/S 4.5 and FW/S 4.5, a memory card PK/E 1.1 for transferring switching programs and for data home security, a programming adapter for the memory card for connection to a PC (RS 232) and a manual.
SK 0010 B 98 SK 0005 B00 Programming Set GH Q600 1942 R0001 20 – PK/E 1.1 Memory Card GH Q600 1943 R0001 20 –

Time Switch, 2-channel, MDRC Timer with Display and Switch Sensor, 2-fold, FM

Provides timed switching in a weekly program of electrical load groups via the ABB i-bus future
® . Each channel can switch a load group ON or OFF or send a bright- ness value to dimming actuators. 24 memory locations with configurable architectural block formation of weekdays. Flush-mounted timer for ABB i-bus coupler 6120 U-102-500, 6110 U-101-500 and 6114 U-500. Timer with display, two channels with 4 timer objects each, astro function. Switch sensor function (swit- ching /dimming/shutter / luminaire scenes extansion / value- transmission / ventilation). SW/S 2.5 GH Q605 0062 R0001 20 2
6128_10-84 SK 0010 B00 ® 6128/10-82 savanna/ivory6136-0-0145 31–6128/10-84-500

Time Switch, 4-channel, MDRC

davos/studio white6136-0-0148 31–6128/10-85 manhattan/graphite6136-0-0149 31–6128/10-89 Provides timed switching in a daily, weekly and yearly program of electrical loads via the ABB i-bus
® stone/light grey6136-0-0153 31–future . The time and date are sent to synchronise other bus devices on the ABB i-bus
® ® linear6128/10-81
SK 0063 B00 . Each channel can switch a load group ON or OFF to send a brightness value to dimming actuators. The programming of the switching times is carried out anthracite6136-0-0144 31–6128/10-82 savanna/ivory6136-0-0145 31–6128/10-83 aluminium silver6136-0-0146 31–6128/10-84-500 on the clock or via the PC in connection with the memory davos/studio white6136-0-0148 31–6128/10-85 card PK/E 1.1 and the programming set PS/E 1.1. manhattan/graphite6136-0-0149 31–6128/10-89 stone/light grey6136-0-0153 31–solo SW/S 4.5 GH Q605 0061 R0001 20 6
® 6128/10-82 savanna/ivory6136-0-0145 31–6128/10-84-500 davos/studio white6136-0-0148 31–6128/10-85 manhattan/graphite6136-0-0149 31–6128/10-86 samoa/light green6136-0-0150 31–6128/10-87 toscana/purple6136-0-0151 31–6128/10-88 attica/pigeon blue6136-0-0152 31–carat6128/10-81 anthracite6136-0-0144 31–6128/10-82 savanna/ivory6136-0-0145 31–6128/10-84-500 davos/studio white6136-0-0148 31–pur 6128/10-866 stainless steel, paint finish 6136-0-0168 31–
MDRC = Modular DIN-rail Component, SM = Surface Mounting, FM = Flush Mounting,

29

LF = Light Fitting, *PG = Price Group, **MW = Module Width 18 mm